Home > ENGINE > RACE ENGINES >

22R/RE Stage 5 Pro Race Long Block
22R/RE Stage 5 ProRace Long Block



 
Racer Net: $7,000.00

Part Number: 1002075
Qty:

Features
 
Features
22R/RE Stage 5 Pro Race Long Block


When you're ready to play with the big dogs, look no further than LC Engineering's Stage 5 series race engines! LCE's engine department has built some of the strongest 22R engines on the planet. Based on over 20 years of experience and countless hours of research and development from all forms of racing, we can supply you with not only some of the most powerful race engines, but also some of the most reliable. The Stage 5 is the accumulation of all these years of experience. Starting from the completely studded block (ARP head and main studs) to the radically modified cylinder head, there is no match for LC Engineering's Stage 5 race engines. All of our motors come blueprinted, assembled, and dyno tested.

ALL STAGE 5 SERIES ENGINES COME WITH THE FOLLOWING COMPONENTS:
  • LCE Pro Crankshaft & Crankshaft Scraper
  • LCE Chromoly H-Beam Connecting Rods
  • Oil Pan
  • LCE Pro Block Brace
  • Clevite Main, Rod & Thrust Bearings
  • Brand New Water Pump
  • LCE Pro Oil Pump & Oil Pump Bypass (Pressure Adjustment)
  • LCE Dual Row Timing Chain Kit & New Custom Timing Chain Cover
  • ARP Head Studs & ARP Main Cap Studs
  • Radically Ported Cylinder Head (Brand New Casting) & MLS Head Gasket
  • New OEM Aluminum Toyota Rocker Arms & LCE Pro Rocker Shafts
  • LCE Dual Row Adjustable Cam Gear
  • LCE Dual Valve Springs & Titanium Valve Spring Retainers
  • NGK Spark Plugs
  • Billet Oil Cap
  • LCE Pro Water Block Plate Kit
  • LCE "Red Head" Race Valve Cover
  • 94mm Forged Pistons (Your Choice of Compression Ratios)
  • 48mm Stainless Steel Swirl Polished Intake Valves & 40mm Stainless Steel Swirl Polished Exhaust Valves
  • Your Choice of Custom Performance Camshafts


A Long Block is an automotive term describing an engine sub-assembly consisting of the following:
  • Short block. The long block is always a superset of the corresponding short block.


  • Cylinder head. A complete new cylinder head assembly is installed with a new head gasket and torqued to specification. (LCE uses only new heads and parts on 85+ late model engines) Complete cylinder heads include new valve springs, valve guides (if applicable), valve seats (if applicable), cam buckets (if applicable), valve locks, and valve keepers. The new head castings are free from cracks, warps, and holes.
On all LCE Pro engines, the camshaft(s) will be installed. A Long Block engine replacement will require swapping out parts from the original engine to the long block. These parts include the intake manifold, the exhaust manifold, alternator, power steering pump (if installed in the vehicle), and air conditioner compressor (if installed in the vehicle). For a complete list of parts included; please see above text. As a general rule of thumb, all LC Pro long blocks will be completely assembled from valve cover to oil pan, but will not include intake, exhaust, or ignition.



Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ENGINE > RACE ENGINES