Builder Series: Street Engine Kit 22R/RE 1985-1995
Toyota engines are known for their longevity. So it is no surprise to see some of these with 200,000 plus miles on them. Unfortunately they will need some attention eventually and that is exactly where LC Engineering's Rebuild Kits come in. This time LCE went the extra mile with the Builder Series Rebuild Kits, providing everything you need to rebuild your engine like it was an LCE Street Performer Engine. With all the components you need to go
through that tired old engine and freshen it back up.
- 1010112 Economy Rebuild Kit
- 1021020 Street Performer Cylinder Head with Camshafts of Choice
- 1023019 Rocker Arms
- 1085006 Billet Wire Loom
- 1024105 LCE Valve Cover
- 1024082 Billet Oil Cap
- 1024085 PCV
- 3035040 K&N Breather with Adapter
- 1016129 Water Pump
- 1024063 Head Bolts
LCE recommends to use with our Crank Scraper P/N: 1013022
WE WILL NEED TO KNOW WHAT SIZE PISTONS YOU WILL NEED. WE ALSO NEED
BEARING SIZES FOR RODS AND MAINS. YOU CAN SELECT YOUR PROPER SIZE ON THE
UPPER RIGHT CORNER OF THIS PAGE.
WE DO EXCHANGE UNOPENED
PARTS, ALL BOXES ARE CLEARLY MARKED ON THE OUTSIDE WITH THE SIZE, CHECK
AND VERIFY EVERYTHING BEFORE OPENING THE BOX. WE RECOMMEND KNOWING YOUR
SIZES BEFORE ORDERING. BEFORE DOING ANY BORING ON ANY BLOCK, YOUR
MACHINE SHOP SHOULD HAVE THE PISTONS IN ORDER TO FIT THEM CORRECTLY.
YOU ORDER STANDARD SIZE PISTONS PLEASE UNDERSTAND THAT WE DO NOT
EXCHANGE STANDARD SIZE PISTONS ANY LONGER. THE REASON FOR THIS IS THAT
MOST OF THE BLOCKS NEED TO BE OVER-SIZED FOR THE CORRECT CLEARANCES.
Contact our Tech support line for further information: 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!