Home > ENGINE > BOTTOM END > Connecting Rods > Connecting Rods >

LCE Connecting Rod Chromoly H-Beam 3RZ (Toyota Journal)
Connecting Rod - 3RZ Chromoly Rod (Toyota Journal)



 
Alternative Views:


Our Price: $490.95

Part Number: 1013199
Qty:

Features
 
Features
LCE Connecting Rod Chromoly H-Beam 3RZ (Toyota Journal)
**Must Use Special Forged Piston 1014375 & Rod Bearings**
When 300 horsepower or more is expected, a stronger rod is recommended. Pro Chromoly H- Beam Rods will fit the bill. LCE H-Beam 4340 Forged Chromoly Steel Connecting Rods are manufactured from a two-piece forging process. This process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the rod. LCE includes a higher content of nickel & chrome, which increases the strength & fatigue life without making the rod brittle. Every rod is shot peened to stress relieve the metal. LCE x-rays, sonic tests and magnafluxs each rod to insure quality. Every rod is multi-stage heat treated and includes 7/16" ARP 8740 bolts which can handle up to 210,000psi. The silicon bronze bushings are inserted for floating piston pin.

Each rod set purchased are balanced end to end of each other +/-5 grams. Each rod is 160 grams lighter than a factory Toyota connecting rod. A total rotating weight loss of 1.5 pounds which will make for a quicker throttle response, faster revving and less wear to the bearings and crankshaft. Stock con rod weight 836 grams as compared to these H-Beams at 675 grams. LCE H-Beam rods are ready to run; installation instructions, ARP rod bolts and Moly Lube are included. (Complete set of 4 rods)

Warning: Will Not Work With The Stock Toyota Components. Must use a different piston and rod bearing.

For a complete Piston, Connecting Rod Set see part number 1010021

For Replacement Rod Bearings for this set you will need to use one of the following:

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Wonderful Service April 8, 2015
Reviewer: David Fleck from Cape Coral , FL United States  
I ordered a set of forged pistons for my 3rz Tacoma from LC. After receiving the pistons and sending the block and pistons to machine shop, I found out that the wrist pins did not fit the connecting rods. I called LC and they informed me they sent the wrong pistons that only use their custom rods. LC immediately offered a discount on the custom rods or to replace pistons, I chose to replace the rods. They shipped out that day and are now going into my turbo 3rz Tacoma. LC was a pleasure to do business with and rapidly repaired any errors. I look forward to doing more business with LC for years to come!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
thank u July 7, 2014
Reviewer: Mohammed Al Shegawi from Buriydah, Saudi Arabia  
very goood products

very cheap shipping

and

good price

Was this review helpful to you?


Browse for more products in the same category as this item:

ENGINE > BOTTOM END > Connecting Rods > Connecting Rods