We designed our Circle Track Oil Pans to minimize air being sucked into the oil pick-up tube. Our pan extends the bottom sump towards the right side with baffles and a windage tray inside the oil pan to control oil slosh. The oil pick-up tube has also been extended to reach the broader and deeper sump.
NOTE: These oil pans are built when ordered and average a (4) week lead time to produce.
Contact our Tech Support Line for further information at 928-855-6341.
To open a printable PDF version of this instruction CLICK HERE
LC Engineering's oil pans give you the extra protection from oil starvation by building "doors" around the oil pick-up to keep the pick up screen in oil at all times. Always test fit the pan before final installation. Since these pans are made for so many different years, there may be some minor modifications needed. Check for proper oil pick up tube and dipstick clearance. You may have to trim the windage screen to gain extra clearance. Always be sure to clean the pan and pick up completely prior to final installation!
Installation: