Home > INTAKE > Fuel Injection > Fuel Injection Kits >

LCE Pro Fuel Injection Kit #3 4Cylinder 0-15 lbs Boost
LCE Pro Fuel Injection Kit #3 4Cylinder 0-15 lbs Boost


 
Racer Net: $1,699.00

Part Number: 1063028

Pro Fuel Injection Extra Options

Knock Sensor Upgrade:
Knock Sensor Upgrade-1063018 [Add $120.00]

A/C Fast Idle / Cold Start Relay:
Add To Order-1063009 [Add $79.00]

LCE Pro Fuel Injection Fan Relay:
Add To Order-1063008 [Add $37.50]

LCE Pro Fuel Injec. Fuel Pump Relay:
Add To Order-1063015 [Add $37.50]

22RE Pro 8.5mm Spark Plug Wire Set:
Add To Order-1083021 [Add $68.95]

2/3RZ Pro 8.5mm Spark Plug Wire Set:
Add To Order-1083024 [Add $146.95]

K&N Oval Straight Filter (Attaches:
Add To Order -3035091 [Add $39.95]

Wideband AFR Combo:
Add To Order -1099066 [Add $199.99]

Qty:
Features
 
Features
LCE Pro Fuel Injection Kit #3 4Cylinder 0-15 lbs Boost


The affordable engine management system that YOU can program! LC Engineering is now offering Pro Fuel Injection Kits for the Toyota 22R/22RE/ 2RZ/3RZ engines in three different configurations. Based on the SDS EM-4 system, the LCE Pro Injection Kit is a fully programmable, stand alone, engine management system designed to replace the factory Toyota injection computer or convert your carbureted engine to fuel injection using an OEM EFI intake manifold injectors and throttle body. It provides excellent results with naturally aspirated engines, superchargers, turbochargers and all types of fuels in both off-road and street applications. This system does NOT require expensive software or a laptop computer for the programming. Using speed/density airflow metering, the LCE Pro Injection allows you to eliminate the bulky and restrictive OEM airflow meter. Full sensor diagnostics and programming are available in real-time. Our systems are designed to be easier to install and program than any other unit on the market today. All systems come complete with a plug-in main wiring harness and a custom tailored injector harness so you don't have to cobble them together from individual parts.

This kit is the ultimate control. This kit will control fuel and ignition using the supplied coil packs. This kit does it all and comes with everything you need for basic installation. This system controls fuel delivery and ignition timing on 4 cylinder engines to 9750 rpm. Its crank triggered, direct fire coil pack replaces both distributor type and OEM distributorless ignitions. Timing is programmable in 250 rpm increments with 64 boost retard locations available for supercharged and turbocharged engines and ignition retard under nitrous activation. The included coil packs deliver a powerful, long duration spark and is suitable on engines with specific power outputs of up to 200hp/liter. The 4F comes complete with coils and crank trigger.

Installation of trigger magnets into the harmonic balancer is required.

Stage 3 Kits Include:
  • Simple Digital System ECU
  • 2 Bar Map Sensor
  • Billet Plate Kit (Kit 3)
  • LCD Programmer
  • Main Wiring Harness
  • Air Temp Sensor
  • Fuel Trim Control, +/- 50%
  • Water Temp Sensor
  • Injector Harness
  • High Energy Coil Pack
  • Comprehensive Manual


  • NOTE: This kit is designed for use on supercharged or turbocharged engines. Depending on your boost levels, the addition of larger injectors should be considered mandatory to keep up with the fuel demands of your engine.

    Programmable Parameters Include: RPM Limiting, Start Function, Manifold Pressure, Throttle Position Sensor, Acceleration Function, Air Temperature, Ignition Timing, MAP Retard and Boost Limiting!

    Click here to view detailed Installation Instructions for this product.

    This kit can take 1-2 weeks before it will ship from our facility.
    Please contact our sales office with any questions.


    Absolutely NO returns on this item!


    Contact our Tech Support Line for further information at 928-855-6341.

    Check out www.LCEngineering.com for New Products, Tech Articles,
    Specials & Monthly Newsletters!
    Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

    Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

      0 of 0 people found the following review helpful:
     
    Sds July 31, 2017
    Reviewer: Carter Deane from Palo Alto, CA United States  
    Great product with great information. Staff is super helpful. Haven't finish the install yet but so far so good. Only thing I would add eould be an easy template for drilling the mag holes

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    INTAKE > Fuel Injection > Fuel Injection Kits