Home > BOOST > TURBOCHARGERS > Turbos & Kits >

Pro Turbo Kit (Low Boost) 22RET Turbo Block Only
Pro Turbo Kit Low Boost 22RET Turbo Block Only



 
Racer Net: $2,499.95

Part Number: 1071010
Qty:

Features
 
Features
Pro Turbo Kit Low Boost 22RET Turbo Block Only

LCE's Turbo Kits are designed for use on the Toyota 22RE-powered trucks, 4Runners. Whether for street or competitive drag racing, LCE can configure a custom turbo kit for your specific needs. The LCE street turbo kit is designed to utilize our Pro Fuel Injection System or any other stand-alone engine management. Along with larger injectors, the Pro Fuel Injection can be programmed to provide the correct fuel and ignition curve for a performance turbo engine. For those who aren't ready to step up to a stand alone fuel management system, we recommend our Mass Airflow Conversion kit. Please make sure your engine is set up to handle boost before adding a turbocharger kit.

This street turbocharger is designed to spool quickly for maximum drivability in street vehicles. This turbo utilizes an internal wastegate for simplicity. We pre-set the wastegate to 7psi, which is plenty for most street engines, but can be easily adjusted without the need for removing the wastegate and swapping springs like an external gate. This turbo will support up to 250+ horsepower, and can be turned up to about 12-18psi while still being efficient.

The base kit features a custom Garrett turbo with an internal wastegate set to 7psi, a tig-welded CNC-machined billet steel manifold, stainless steel down tube, charge pipe to connect to throttle body, and all the necessary gaskets, fittings, lines and hardware for installation. This turbo kit will work best with a stand-alone fuel management system (like the LC Pro Fuel Injection Kit) or a piggy back system (like the Mass Airflow Conversion Kit). You may need to modify or fabricate an intake tube if you plan on retaining your stock mass airflow airbox.

Turbo Kit Specs:
  • TB03 60-Trim Turbo
  • .48 AR Turbine Housing
  • 360 Degree Performance Thrust Bearing
  • Internal Wastegate Pre-Set To 7psi
  • Billet Steel Turbo Manifold
  • Ceramic Coated 304 Stainless Steel Downpipe (2-1/2")
  • Ceramic Coated Charge Pipe (2")
  • Silicone Couplers
  • Hose Clamps
  • Oil Feed Line
  • Oil Drain Hose
  • Oil Feed And Drain Fittings
  • Gaskets


  • Application Notes:
    This kit is designed to work with the stock Toyota turbo block. Oil feed and drain lines will hook to the factory locations. See part number 1071012 for the kit that is designed for NON Turbo Blocks.


    Contact our Tech Support Line for further information at 928-855-6341.

    Check out www.LCEngineering.com for New Products, Tech Articles,
    Specials & Monthly Newsletters!
    Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

    Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

      0 of 0 people found the following review helpful:
     
    Pro turbo kit 22ret October 15, 2015
    Reviewer: Leo Steiner from Puyallup, WA United States  
    Customer service is/was excellent - spoke with and live chatted with Brad on this kit.
    As for the kit - good quality, everything needed is there  - but this is not just plug and play - took me about 10 hours of install - its a tight fit.
    Once installed truck runs great added a BOV with re-circulation back to intake and I added heat wrap to the down pipe, turbo blanket and heat shield wrap to the power brake booster (its HOT under there).
    Very happy with my purchase - Thanks.

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    BOOST > TURBOCHARGERS > Turbos & Kits