Home > AXLE > GEARS & LOCKERS > Tacoma, FJ Cruiser >

Ring & Pinion Rear Toyota 10.5" 4.88 2007-2012 Tundra 5.7 Liter Only
Ring & Pinion Rear Toyota 10.5" 4.88 2007-2012 Tundra 5.7 Liter Only


 
Racer Net: $369.99

Part Number: 1098006
Qty:

Features
 
Features
Ring & Pinion Rear Toyota 10.5" 4.88 2007-2012 Tundra 5.7 Liter Only

Nitro 4.88 Ring & Pinion for Toyota 10.5" Rear 2007 and newer Tundra.
See part number for the full install kit or number for the mini install kit.

Vehicle Applications:
2007-2012 Tundra With The 5.7 Liter Only

Nitro Ring & Pinions are among the best in the industry. By using better materials, machining, heat treating and lapping process, Nitro can ensure a strong, quiet running, long lasting setup. Every new application is put through multi point inspections and actually installed and set up by Nitro's in-house differential experts to ensure excellent fitment and easy setup. At Nitro we see strive to meet consumer demand for new ratios and applications, and we are continually developing new products to stay ahead of the competition.

-Precision machining & heat treating processes ensure strength and excellent fitment.

-CNC gear lapping ensures ease of installation, excellent contact patterns and a quiet running setup.

-Street or strip, track or trail you can depend on Nitro.
What gear ratio do I need?


Differential Gear Ratio determines the number of times the drive shaft (or pinion) will rotate for each turn of the wheels (or ring gear). So if you have a 3.73:1 gear ratio the drive shaft turns 3.73 times for every turn of the wheel.

Gear ratio is calculated by dividing the number of teeth on the ring gear by the number of teeth on the pinion gear. The higher the number, the lower the ratio: a 5.29 gear has a lower ratio than a 4.10 gear. With a lower gear ratio the drive shaft (and thus the engine) turns more for each revolution of the wheel, delivering more power and torque to the wheel for any given speed. Lower ratios are generally desirable when going off-road. Higher ratios are better for freeway driving since they run at lower RPM’s and offer better fuel economy.

Changing tire size affects the final drive ratio. Switching from a 30" tire to a 35" tire changes the final drive ratio by about 17%. This may drop the engine out of its' "power band" and result in poor performance and fuel economy. To restore performance you must change the gear ratio to compensate for the change in tire size. If you originally had 3.07 gears you need a ratio that is approximately 17% lower, such as 3.55. If you want to increase off road performance you might want a 4.10 or lower ratio.
Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AXLE > GEARS & LOCKERS > Tacoma, FJ Cruiser