Rock Assault Front Axle Housing
Trail-Gear is proud to introduce the newest addition to the Rock
Assault™ Axle Housing family, our Rock Assault™ Front Axle Housing. This
exclusive axle design is the first in the industry to be released with
all new parts. That's right, our axle housing is not made with
30-year-old used knuckle balls. Our knuckle balls are forged from 1035
steel, making them much stronger than stock, eliminating closed or bent
The axle tubes have been offset above the housing centerline, so the
inner axles ride near the bottom of the axle tubes rather than in the
center. The result is an increase of 3/8" in ground clearance under the
axle tubes. The axle tubes are made from 5/16" thick 1020 DOM tubing
with an outer diameter of 3". The short side of the axle tube has been
lengthened by 3", making the axle IFS width, so there is no need to run
wheel spacers. A 27 or 30 spline short side chromoly axle shaft will be
supplied with the axle housing.
The heavy-duty, press formed, 1/4" plate steel center section is shaved
to give you 3/4" of additional ground clearance under the differential.
The differential mounting surface is made from 1/2" plate steel to
ensure studs can not pull out, even under heavy loads. Our housings are
precision alignment checked using state-of-the-art, 3D digital imaging
equipment to ensure that all Rock Assault™ Axle Housings are 100%
straight and true.
The Rock Assault™ Front Axle Housing will come in your choice of bare
tubes, with spring perches installed, or 3-link ready with a panhard
bracket included. For an additional charge we can install an inspection
cap making inspecting your front ring and pinion a breeze. Axle housing
is shipped unpainted and lightly oiled to prevent rust during shipping
59" from WMS to WMS.Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Or try our new web site LCEPerformance