LCE Street Header Kit 2WD Direct Fit 22R/RE 1985-1995
LC Engineering's Street Header Kit for 2WD 22R/RE Pickups 1985-1995
 
Our Price: $593.95

Quantity in Stock:10

Part Number: 1041030
Qty:

Details Fitment Instructions
 

Street Header Kit

(47 State Legal)

Whether your truck is bone stock or built for extra performance, the LC Engineering Street Header is the "best bang for your buck" bolt-on part you can buy. You should expect to see a 10-15% power increase with a good boost to the top-end of the powerband where these trucks struggle. With so many choices for a header on the market, some certainly being cheaper, we can understand if you are struggling with the decision of which one to buy. We can tell you there is a good reason why our header is still the #1 on the market and worth the extra cost.

Our most popular product is the street header kits. LC Engineering uses all 304 1 1/2" Stainless steel tubing, 16 gauge .065 wall, the collector is made in house with 304 Stainless steel. A huge 1/2" thick steel header to head flange and 3/8" thick steel 2-1/4" flange at the collector that accepts the stock Toyota round exhaust gasket. As if that were not enough, the whole package is coated in a high temp ceramic coating. To make the install easy on you LC Engineering supplies you with all the gaskets needed to bolt your header on your vehicle. Our header flanges are cut to allow the use of OEM exhaust manifold gaskets. These gaskets feature a metal crush fire ring and a heat deflector for the plug wires. No cheap paper gaskets to blow out with an LC Engineering Header.

Here are a few reasons why:

  • LC Engineering has been designing, testing, producing and installing these headers for more than 20 years.
  • Since we focus on Toyota performance parts we spend the extra time to make these headers the best they can be.
  • Our header is made with high-quality materials.
  • Our header is coated in a high-temperature ceramic coating.
  • Our head side flange is designed to retain use of the OEM exhaust manifold gasket, the gasket features a metal crush fire ring and a heat deflector for the spark plug wires.
  • We supply all the gaskets you need to complete the install.

Kit Includes:

  • 2WD (82-95) Street Header
  • 22R/RE Header Connector Pipe
  • Includes Air Injection Block Off Plates (2)
  • Street Header Gasket Set (85-95 Specific)

All Toyota Pickups manufactured before 1988 came from the factory with a single wire oxygen sensor, these sensors were non-heated because they were installed in the exhaust manifold very close to the cylinder head where there is a lot of heat. If you have a pre-1988 pickup, when installing our Street Header Kit you will notice that the oxygen sensor provision (bung) has been moved downstream from its factory location. We recommend that anyone with a pre-1988 application utilize our universal 4 wire heated O2 sensor in place of the factory single wire. An O2 sensor must be hot to generate a signal, further downstream the exhaust can be too cool for a non-heated O2 sensor to operate on it's own. A heated O2 sensor gets the sensor up to operating temperature faster and keeps it there. An added benefit to moving the sensor further downstream (and why all modern cars have at least one downstream) is the exhaust gasses are at a more homogeneous mixture, which gives a clearer reading for the computer to adjust fuel delivery. This can improve drivability and gas mileage.

NOTE: We cannot quote fitment to any chassis before 1982. This header kit fits 85-95 2 Wheel drive trucks, auto or manual transmission, and includes an adjustable connector pipe that will connect to most factory catalytic converters. Not for 4Runners 2WD or 4WD. 1984-1995 4Runners were based on a 4wd truck chassis, see Part #: 1041036 for 4Runner fitment. Vehicles made from 1988-1995 come from the factory with a heated O2 sensor and changing the sensor is not necessary unless the one currently installed is damaged. See Universal Heated O2 Part #: 1065034 (Sensor not California Smog Legal). LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims.

NOTE: Due to many fitment differences, we cannot quote fitment to any RV. These were a custom vehicle and not a standard dealership vehicle. We do have a Test Fit Header that we can ship to you with a return label for $75. This will be the only way to confirm fitment to anything considered an RV.
Installation Note:

Over 20+ years of producing these headers LC Engineering has made all attempts to make these header kits fit as best as possible. Unfortunately, there is a very small amount of applications that may require more extensive modification or even fabrication to make the connector pipe fit correctly. This is mostly contributed to numerous changes in Toyota's production along with aftermarket modifications. LC Engineering offers full technical support to make your fitment as easy as possible but they will not be responsible for any "custom" connector pipes.



Contact our Tech Support Line for further information at 928-855-6341.

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
02 Relocation Kit Oxygen Sensor - Heated Universal 4 Wire 22RE Header Stud Set - 20R/22R/22RE/2RZ/3RZ 1985-1995 Pickup Pro Flow Exhaust System
Our Price: $10.35

Add
Our Price: $64.53

Add
Our Price: $19.71

Add
Our Price: $539.95

Add
02 Relocation Kit Oxygen Sensor - Heated Universal 4 Wire 22RE Header Stud Set - 20R/22R/22RE/2RZ/3RZ Pro Flow Exhaust System 22R/RE/3VZ 2WD & 4WD 1985-1995 Pickup

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 85 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 LCE Long Tb Hdr for 22re-cab/chassis-1ton dually January 29, 2024
Reviewer: William Malinowski from Earlville, IA United States  
Great design, great welds, great material.  Well packed with thorough instruction documents.  Most effective improvement this truck has received.  Truck has alloy flatbed so it's often loaded to capacity.  It really needed some help.  Header fit perfectly!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Must have Headers for a 2wd July 11, 2023
Reviewer: Palakiko from Lincoln, CA United States  
Great product with great results, a must add on with their Pro Flow Exhaust System. Can’t wait to buy more LCE parts for my 85 2wd pickup.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 24, 2023
Reviewer: Russ Ingram from Maryville , TN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 3, 2023
Reviewer: Doug Braxton from Cary, NC United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Let me tell you April 3, 2023
Reviewer: John Quinene from Ridgecrest, CA United States  
Can already feel the POWA par

Was this review helpful to you?

View All Customer Reviews