LCE Street Header Kit 4wd Direct-Fit 22R/RE 1985-1995
Street Header Kit 4wd Direct-Fit  22R/RE 1985-1995
 
Our Price: $593.95

Quantity in Stock:(Backordered)

Part Number: 1041036
Qty:

Details Fitment Instructions
 

Street Header Kit

(50 State Legal C.A.R.B. EO: D-462-1)

Whether your truck is bone stock or built for extra performance, the LC Engineering Street Header is the "best bang for your buck" bolt-on part you can buy. You should expect to see a 10-15% power increase with a good boost to the top-end of the powerband where these trucks struggle. With so many choices for a header on the market, some certainly being cheaper, we can understand if you are struggling with the decision of which one to buy. We can tell you there is a good reason why our header is still #1 on the market and worth the extra cost.

Our most popular product is the street header kits. LC Engineering uses all 304 1 1/2" Stainless steel tubing, 16 gauge .065 wall, the collector is made in house with 304 Stainless steel. A huge 1/2" thick steel header to head flange and 3/8" thick steel 2-1/4" flange at the collector that accepts the stock Toyota round exhaust gasket. As if that were not enough, the whole package is coated in a high temp ceramic coating. To make the install easy on you LC Engineering supplies you with all the gaskets needed to bolt your header on your vehicle. Our header flanges are cut to allow the use of OEM exhaust manifold gaskets. These gaskets feature a metal crush fire ring and a heat deflector for the plug wires. No cheap paper gaskets to blow out with an LC Engineering Header.

Here are a few reasons why:

  • LC Engineering has been designing, testing, producing and installing these headers for more than 20 years.
  • Since we focus on Toyota performance parts we spend the extra time to make these headers the best they can be.
  • Our header is made with high-quality materials.
  • Our header is coated in a high-temperature ceramic coating.
  • Our head side flange is designed to retain use of the OEM exhaust manifold gasket, the gasket features a metal crush fire ring and a heat deflector for the spark plug wires.
  • We supply all the gaskets you need to complete the install.

Kit Includes:

  • 4WD (82-95) Street Header
  • 4WD Connector Pipe
  • Street Header Gasket Set (85-95 Specific)

All Toyota Pickups and 4Runners manufactured before 1988 have a factory non-heated single wire oxygen sensor. When installing our Street Header Kit you will notice that the oxygen sensor provision has been moved downstream from its factory location. We recommend that anyone with a pre-1988 application utilize our universal 4 wire heated O2 sensor in replace of there factory single wire. This will not only improve the signal but the gas mileage as well as the performance of the vehicle. Vehicles made from 1988-1995 should have a factory heated O2 sensor and should not need to change it unless their factory one is damaged.

NOTE: If your O2 sensor is located in the exhaust manifold then you need to check the box for O2 Relocation Kit. If by any chance you did not select it with your kit and you need it, don't worry all you need is 18 gauge wire and 2 small crimp connectors from your local auto part store. LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims.

Installation Note:

Over 20+ years of producing these headers LC Engineering has made all attempts to make these header kits fit as best as possible. Unfortunately, there is a very small amount of applications that may require more extensive modification or even fabrication to make the connector pipe fit correctly. This is mostly contributed to numerous changes in Toyota's production along with aftermarket modifications. LC Engineering offers full technical support to make your fitment as easy as possible but they will not be responsible for any "custom" connector pipes.

NOTE: Due to many fitment differences, we cannot quote fitment to any RV. These were a custom vehicle and not a standard dealership vehicle. We do have a Test Fit Header that we can ship to you with a return label for $75. This will be the only way to confirm fitment to anything considered an RV.



Contact our Tech Support Line for further information at 928-855-6341.

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
Air Injection Block Plate Kit - 22R/RE Oxygen Sensor - Heated Universal 4 Wire 22RE 02 Relocation Kit Header Stud Set - 20R/22R/22RE/2RZ/3RZ
Our Price: $19.90

Add
Our Price: $64.53

Add
Our Price: $10.35

Add
Our Price: $19.71

Add
Air Injection Block Plate Kit - 22R/RE Oxygen Sensor - Heated Universal 4 Wire 22RE 02 Relocation Kit Header Stud Set - 20R/22R/22RE/2RZ/3RZ

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 237 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Awesome exhaust upgrade! March 5, 2024
Reviewer: Victor Sintef from Tehachapi, CA  
My 1987 Toyota truck needed a new muffler and tailpipe so I decided to get LCE’s Pro-flow exhaust system. Then I decided to go all out and add LCE’s Street header. I’m so glad I did. My truck runs and sounds great!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very prompt delivery. Product fit perfectly January 29, 2024
Reviewer: Bob Gilliland from Sayre, OK United States  
O


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 LCE Street Header December 13, 2023
Reviewer: Anonymous Person from Kalama, WA United States  
Perfect fit and very good quality

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 1, 2023
Reviewer: Jordan Gibbs from Nipomo, CA United States  
Everything looks/ works great. Only issue I had was section of tubing between header flange and cat flange was about 5”-6” too long. Everything was completely stock so I’m not sure why the pipe needed to be cut. But I cut it and everything fit fine

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Header and full exhaust system November 20, 2023
Reviewer: W J Whitakker from ArlingtonE, NE United States  
I was surprised how it looked and the quality is more than expected.

Was this review helpful to you?

View All Customer Reviews