Home > ENGINE > ENGINE COMPONENTS > Water Pumps >

Street Water Pump - 20R(9/77-80) or 22R(81-84)
Street Water Pump - 20R(9/77-80) or 22R(81-84)


 
Racer Net: $58.95

Part Number: 1016132
Qty:

Features
 
Features
Street Water Pump - 20R(9/77-80) or 22R(81-84)


When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. We have the highest quality Toyota water pumps in stock all of which are new OEM quality Japanese-manufactured (Nissan or Aisin) pumps, not cheap Chinese rebuilds. Gasket is included with the water pump. Don't be left stranded or damage your new or rebuilt engine because of a simple water pump. If you have any questions feel free to give us a call and we would be glad to help.

This water pump is also utilized in our Dual Row Timing Chain Conversion Kit's Part # 1015012

Note:

The most common water pump failure is due to over tightened V- belts. An incorrectly adjusted fan belt may shorten the life of the belt or the water pump. After you install your belt you should have 5/8 in. to 3/4 in. of slack when pushing the belt with your thumb. The belt can be twisted about a quarter turn when the tension is correct. As per a Toyota Factory Service Manual, the drive belt should be 125 +/- 25 lbs. measured with a Nippondenso BTG-20 (95506-00020) or a Borroughs BT-33-73F.



Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Average Customer Review: 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
Street Water Pump - 20R(9/77-80) or 22R(81-84) September 6, 2016
Reviewer: Peter Van Keuren from oracle, AZ United States  
correct fit

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Street pump March 12, 2015
Reviewer: Michael Cinko from Covington , WA United States  
Great stuff u guys do down there in Az

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Look at thi impeller July 9, 2013
Reviewer: Michael P. from Lenoir, TN United States  
These water pumps have a, cast pressed on, impeller that will direct coolant better without causing turbulence in the pump. The part store pumps use a stamped steel impeller held with a treaded nut. Lots of turbulence and less flow this way. Look at what goes in the part, don't go cheap.

Was this review helpful to you?


Browse for more products in the same category as this item:

ENGINE > ENGINE COMPONENTS > Water Pumps
COOLING > Water Pumps