LC Engineering friction plates are made of high quality 1045 high carbon steel to withstand high heat under extreme friction. CAD/CAM designed and then CNC machined to strict tolerances for perfect fitment and hassle-free, bolt-in performance. With LC Engineering's bolt pattern, you get a consistent down force over the entire friction plate providing balance. They can be used with any type of clutch material including organic, Kevlar, ceramic, metallic and sintered iron. Applications using more aggressive clutch disk materials can simply replace the insert instead of resurfacing the flywheel. Blancher ground so it's a perfect surface every time. They attach to the friction surface using aerospace nuts and bolts that are one-time use only. These are some of the best fasteners money can buy. They are chosen because of their incredible shear strength and corrosion resistance. Wear pad kits include hardware and wear a pad.
NOTE: For 5VZ you must check for old or new style wear pad. Measure back side of wear pad (side that sits on flywheel). New style measures approx. .310" from inside edge of pad to inside edge of the bolt hole. Old style measures approx. .410" We will need this information when you place your order.
Contact our Tech Support Line for further information at 928-855-6341.