Weber 32/36 Carb & Intake Performance Package Toyota 20R (Manual Choke)
Weber 32/36 Carb & Intake Performance Package Toyota 20R (Manual Choke)
 
Our Price: $990.03

Quantity in Stock:(Backordered)

Part Number: 1030000
Qty:

Details Fitment Instructions
 

Weber 32/36 Carb & Intake Performance Package

(Manual Choke / 20R)

Kit Includes:

  • Single plane intake manifold (20R)
  • Weber 32/36 carburetor kit
  • Weber Air Cleaner With Filter

One of the best ways to get some extra performance out of your little Toyota 20R is to upgrade the carburetor and intake manifold. It is always important to match your upgrades to each other to make sure everything works well together, so with this kit, LC Engineering has done all the homework to make sure that you get the perfect combination of parts to maximize your performance.

Weber 32/36 Carburetor Kit:

The Weber 32/36 kit utilizes a 32/36 progressive Weber carb and is designed to upgrade your Toyota with an economical performance carb. Increase horsepower as well as improve drivability and fuel economy compared to the stock carburetor. The Weber 32/36 is the optimum carburetor to replace a worn-out or hard to maintain factory carb. The 32/36 progressive is an excellent carb for low-end power and fuel economy. If you've got a mildly built motor or daily driver, the 32/36 is the way to go for torque, low-end power, and fuel economy. This is a Manual Choke Carb. For Electric Choke, see Part # 1030003.


Main Jet 140
Secondary Jet 140
Primary Idle 60
Secondary Idle 50
Air Correction (Primary) 170
Air Correction (Secondary) 160
Pump Nozzle 50

NOTE: Requires fuel pressure to be regulated to 2.5-3psi. The factory fuel line from mechanical pump is roughly 1/16" smaller than Weber Regulator/Carb fuel line. Slight pressure is all that is needed to fit the smaller line. This carburetor does not come with provisions to run a kick-down cable for an automatic transmission. If your Kick Down cable attaches to the Bell Crank, you will not be affected. If it attaches to the carb, modifications will be needed. Most are to the Bell Crank from the factory.

Downdraft Intake Manifold:

This 20R intake manifold will work correctly to get you the most performance possible from your engine. With a large open plenum and runners, this manifold will outflow your stocker and supply your performance engine with enough airflow to make the most horsepower possible. This manifold is equipped with a Weber carburetor flange so you can bolt your performance carburetor on the manifold without having to use any adapters. This manifold has all the same vacuum and sensor ports as your stock manifold, so you don't have to worry about adapting different fittings together to get all your vacuum lines and temp sensors hooked back up! If you have one of our cylinder heads (or plan on getting one in the future), we can also port match your new intake to any of our cylinder head stages.

NOTE: Most Early Trucks and Celica's will have hood clearance issues with the bigger filters.

Optional Parts Info:

The manifold in this kit is designed to use a rubber style thermostat gasket (supplied with manifold). There are a few other upgrades available for this manifold so take a minute to browse through the parts below to see if you will need any of them for your application. If you have any questions, please contact one of our sales reps to help you determine what parts you may or may not need.

  • Intake Manifold Gasket, see Part # : 1032009
  • Water Block Plate(Under Manifold), see Part # 1032032
  • Pro Water Block Off Kit, see Part # 1016015
  • Intake Manifold Plug Kit, see Part # 1032050
  • EGR Block Plate Kit, see Part # 1016038
  • Intake Manifold Stud Kit, see Part # 1035048
  • Weber Spiral Spacer, see Part # 1033023

Related Weber 32/36 Kits:

  • Weber 32/36 Carburetor Only 20R/22R Manual Choke, see Part #: 1030035
  • Weber 32/36 Carburetor Only 20R/22R Electric Choke, see Part #: 1030031
  • Weber 32/36 Carburetor Kit With Electric Choke - 20R/22R, see Part #: 1030021
  • Weber 32/36 Carburetor Kit With Manual Choke 20R/22R, see Part #: 1030032
  • 22R Weber 32/36 Carburetor Kit 81-83 (Smog Legal) 2WD Pickup & Celica, see Part #: 1030062
  • 22R Weber 32/36 Carburetor Kit 81-84 (Smog Legal) 4WD Pickup, see Part #: 1030063
  • Weber 32/36 Carburetor Performance Package With Electric Choke, see Part #: 1030026
  • Weber 32/36 Carburetor Performance Package With Manual Choke, see Part #: 1030028
  • Weber 32/36 Carb Kit w/K&N & Billet Cleaner-20R/22R, see Part #: 1030024
  • Weber 32/36 Carb Kit w/K&N Filter (11" x 2")-20R/22R, see Part #: 1030018
  • Weber 32/36 Carb & Intake Performance Package 22R with Stock Weber Air Cleaner, see Part #: 1030066
  • Weber 32/36 Carb & Intake Performance Package 20R (Electric Choke), see Part #: 1030003
  • Weber 32/36 Carb & Intake Performance Package 22R, see Part #: 1030039
  • Weber 32/36 Carb & Intake Performance Package 22R, see Part #: 1030036


Contact our Tech Support Line for further information at 928-855-6341.

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
Fuel Pressure Regulator Gauge Kit Low Pressure Carb Only Liquid Gauge Manual - Haynes Weber Carburetor Tuning Manual Cannon Downdraft Manifold 20R Install Kit Fuel Pressure Regulator Gauge Kit Low Pressure Carb Only (Dry Gauge)
Our Price: $192.35

Add
Our Price: $38.94

Add
Our Price: $72.75

Add
Our Price: $145.55

Add
Fuel Pressure Gauge Kit Low Pressure Carb Only Liq Manual - Haynes Weber Carburetor Tuning Manual Cannon Downdraft Manifold 20R Install Kit Fuel Pressure Gauge Kit Low Pressure Carb Only

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 . August 1, 2018
Reviewer: Sean Michael from mesa, AZ United States  
.

Was this review helpful to you?