LC Engineering is known for offering the most powerful and proven Toyota Carburetor kits available. Our dedication to performance has set a standard no one can match! Extensive road and dyno testing have allowed us to produce exceptional kits that offer a wide range of performance options. When you want to make that 20R bark, you need sidedrafts!! LC Engineering has done all the assembly for you. These kits include two sidedraft carbs, intake manifold, air horns, air filters, and linkage kit. LCE then completely assembles the kit, so all you have to do is install and tune. Pro Sidedraft Carb Kits are for more radically modified engines. To aid in fitment, the distance from the head surface to the top of air cleaner on this setup is 12.5". Please make sure you have adequate clearance in your engine compartment.
Labor Options Available:
NOTE: Must use an electric fuel pump. If you are
planning on running an 83-95 style thermostat housing you will also need
to utilize one of our thermostat housing adapters, see Part #:
Requires 2.5 - 3 lbs of fuel pressure, see Part #:
Removes heater supply, you will need the Pro Water Block Plate Kit
Does not have provisions for pcv valve vacuum or front of valve cover
breather hose. Because of this, oil will get dirty in a couple hundred
miles. Plan on changing your oil quite often running these. They are
geared towards racing where these systems are not used. We also follow
the rule of 40mm for pump gas, 45mm for race fuel.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!