22R/RE Pro 2.6L Stroker Kit (1981-1995)
What is a stroker crankshaft? It's 5mm more stroke! (Thats 1/4 of an inch.) Usable power is what the stroker crank will give your engine. It increases the torque of the 22R engine as much as 25 FT/LBS. This means more pulling power for a 4x4 application or increased acceleration for your circle track car. Best yet, you can use this with any type of engine set-up, including the factory EFI system with no adverse side effects. High compression or low compression, we have the pistons to make the stroker crank work for your application. All stroker rotating assemblies come with H-beam connecting rods for maximum strength!
- Choice of 93mm low compression or 94mm Forged Piston Set
- 94mm Pro Stroker Crankshaft
- Pro H Beam Connecting Rods
- Clevite Bearings (Main, Rod & Thrust)
LC Engineering has a full line of performance crankshafts for every 22R/22RE application. All crankshaft cores are tested and inspected for imperfections before we begin working on them. Only the most select cranks are used for our production. All crankshafts are priced outright. No core charges!
LCE recommends to use with our Crank Scraper P/N: 1013022
Contact our Tech Support Line for further information at 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.