Fuel Injector Service
(22RTE Turbo Fuel Injector Service)
NOTE: Customer is responsible for paying postage to send their injectors to LC Engineering. Be sure to include the following with your injectors:
- Name (First & Last)
- Return Shipping Address
- Sales Order Number (Copy of Invoice Preferred)
- Phone Number
The purpose of cleaning and flow testing is to remove any contaminants inside, or outside the injector that impede fuel flow, or degrade fuel spray pattern. While this is being performed, our testing accurately measures each injector's fuel flow ability, and maps the injector performance. Each injector is cleaned and checked for equal flow allowing the fuel supplied to each cylinder to remain consistent across each cylinder. It’s not uncommon for a set of original equipment (OE) injectors to have an unacceptably wide range of fuel flow and it's possible to even have new injectors that do not function properly. This leads to bigger problems and a lack of performance! Each set of flow-matched injectors come with new o-rings, grommets, isolators, and pintle caps that are ready to be installed.
Contact our Tech Support Line for further information at 928-855-6341.
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
. 
