3VZ 3.0L Pickup/4Runner Power Flow 1650psi Power Steering Pump Kit
We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist. Not to mention the fact that, when you try and drill out the inlet to get more volume, the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around 1,300 PSI at only one gallon per minute. Our Power Flow pump puts out 1,650 PSI, which is more than enough to provide you with the steering power that you will need to turn big tires or run a ram assist or full hydraulic steering system.
Trail-Gear has hand-picked each component in this kit to ensure quality, ease of installation, and durability. This kit ships complete with all parts included and full-color installation instructions.
This pump and bracket is designed to fit all Toyota V6 3.0 Pickups and 4Runners from 1989-1995. This kit will not work on 4Runners with a functioning AC because the AC cooling fan must be removed for the placement of the PS Pump cooler. This kit does not fit Toyota V6 3.0 Pickups without AC.
Never use ATF fluid or a semi-synthetic blend. This will void the warranty. Ok to use standard power steering fluid.
Other Parts You May Be Interested In:
#2060090 - 20R/22R/RE/RET Full Hydraulic Pump Kit
#2060091 - 20R/22R/RE/RET Ram Assist Pump Kit
#2060093 - 3VZ Ram Assist Pump Kit
PLEASE NOTE: The color or appearance of some items in this kit may differ slightly from the photo.
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.