Pro Clutch Kit 2GR 3.5 LITER 2016-2020
Pro Clutch Kit
All of LC Engineering's clutch kits feature all new components with a single diaphragm H.D. pressure plate. Don't be fooled by fancy spinning gizmos. A diaphragm clutch delivers full holding power at all engine rpm's. Our Pro Clutch Kit features a heavy-duty pressure plate to provide tremendous heat resistance, holding power and smooth operation. The Pro Clutch Kit has over twice the holding power of a stock clutch with only a slightly stiffer pedal - excellent for use in 4WD with 31" or larger tires, or for vehicles with slight-to-moderate performance upgrades. All LC Engineering's Clutch Kits are specifically designed for varying stages of high performance and/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition. Simply the best!
|
LCE PRO CLUTCH KIT
|
|
Pressure Plate
Clamping Force
|
Torque Limit Ft. Lbs.
|
Horsepower Limit
|
|
LCE PRO 2500 Lbs.
|
300 Ft. Lbs.
|
300 HP
|
NOTE: Fitment is for trucks produced in North America only.
The 2gr 6 Speed Transmission does not use a Pilot Bearing. Not compatible with TDI conversions.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
2013-2015 Tacoma 4.0L Magnaflow Off Road Pro Series Exhaust (Base / Pre Runner / X-Runner / TRD Pro)
Magnaflow Exhaust System
(Off Road Pro Series)
MagnaFlow's dedication to engineering and manufacturing the finest exhaust systems makes for a superior sound and driving experience. Constructed of premium materials and carefully designed for the best fitment and performance, you can have confidence in making the right choice for your vehicle.
Specifications:
- System Type: Cat-Back
- Series: Off Road Pro
- Main Piping Diameter: 2.5"
- Exit Style: Turndown In Front Of Rear Tire
- Inlet Connection Type: Bolt-On
- Muffler Quantity: 1
- Muffler Type: Straight-Through
- Muffler Material: Stainless Steel
NOTE: Verify fitment before ordering.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
Equalized and Flow-Matched RZ Injector Set (4) (1200CC)
Equalized and Flow-Matched Injector Set
(RZ / 1200CC)
These "Direct Fit" equalized and flow-matched fuel injectors are just what the motor ordered! No adapters, clips, pigtails or any messing around with electrical connections. Rest assured knowing that your engine is getting the proper fuel rates in each cylinder.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
*NEW* Anodized Fuel Rail (Black)-22RE/RET
NEW Anodized Fuel Rail
(Black)
LC Engineerings CNC-machined anodized fuel rails are perfect for that show truck looking to get the "edge" on the competition when the hood is popped. The fuel rails feature OEM factory mount locations to allow anyone who would like to replace that old rusty one with a brand new part all the while ensuring maximum fuel flow and a quick installation.
Optional Parts (In Drop-downs):
Union Bolt: Replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails.
-6AN Fitting For Fuel Inlet: This fitting threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer.
-6AN Fitting For Aftermarket Fuel Regulator: Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no need to change the thread on the fuel rail in order to fit an aftermarket regulator. It comes with an O-ring and a crush washer.
NOTE: If you are still utilizing a stock throttle body, you will need our Teflon throttle body gasket to ensure you will not have any clearance issues. If you would like this fuel rail in silver, see Part #: 1072045.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
(3)
