Cross Drilled Slotted Rotors (1989-1995) 22R/RE Pickup 2WD 1/2 Ton 5 Lug (Set of 2)
Rotor Size 9.97 Caliper Casting Number F18Q
A moving vehicle has a large amount of
kinetic energy, and the brakes have to remove this energy in order to
stop. How do the brakes do this? Each time you stop, your brakes convert
the kinetic energy to heat generated by the friction between the pads
and the disc.
Through the process of dimple drilling and
slotting the rotors, not only are the rotors much lighter in weight, but
they cool down much quicker and in turn, will have less failure. The
unique slots in our rotors helps dissipate the gasses released from the
brake pads during braking. This "de-gassing" or "out-gassing" will keep
the pads in contact with the rotor resulting in less brake fade after
repeated stops. Dimple drilling of the rotors allows air to flow over a
larger area of the rotor, cooling the rotor material and the pad from
the extreme heat generated by high speed panic stops; a brake
component's worst enemy. Heavy brake users report reduced rotor warping,
increased pad and rotor life, superior braking performance, faster
stops with less fade, and improved wet-weather braking.
- Increased Pad & Rotor Life
- Reduced Rotor Warping
- Superior Braking Performance
- Faster Stops with Less Fade
- Improved Wet-Weather Braking
- Pads and rotors available to perfectly match your vehicle and driving technique
Contact our Tech Support Line for further information at 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.