Economy Master Rebuild Kit - 20R September of 1977-1980
Time to rebuild that tired engine but you are on a tight budget? No worries, LC Engineering has you covered! These Economy Master Rebuild Kits offer the high quality parts you expect from LC but with a lower cost to help your budget stay on track, and no lower cost does not mean made in China!!! You can rest assured these kits contain no cheap Chinese made junk parts!
Street Hyper PistonsHypereutectic pistons are a much stronger piston that will not absorb as much heat as a cast style piston. That means you can make more power with less wear on your engine!! Pistons come with new wristpins, locks and are available in standard, +.020", +.030", and +.040" bore sizes. These pistons are Safety Auto brand and manufactured in Taiwan.
Hastings Piston RingsHastings piston rings are built with cast iron, barrel face top compression rings. They have conventional cast iron second rings and 3-piece, standard-tension stainless steel oil rings. These ring sets are ideal for street use, race applications, and mild levels of nitrous or forced induction. These piston rings are manufactured in the United States.NOTE:These are not a gapless ring set
Pin BushingsThese bronze pin bushings will replace the worn out bushings in your stock rods. These are a Safety Auto brand and manufactured in Japan.
Main, Rod & Thrust BearingsMain bearing are available in standard, +.010, or +.020". Rod bearings are available in standard, +.010, +.020" +.030", or +.040". Thrust bearing all come in standard size. These are a Safety Auto brand and manufactured in Japan.
Complete Gasket KitThese high quality gasket kits include A composite head gasket and all the other gaskets you need to re-assemble your engine. These are a Safety Auto brand and manufactured in Taiwan.
Timing Chain KitDual row timing chain kits include: chain, guides, tensioner and sprockets. The timing chain tensioner in this kit is made in Japan and the chain and sprockets are made in Taiwan.
Brass Freeze PlugsBrass replacement freeze plugs will last longer than steel or aluminum and give you that extra protection for your engine. These freeze plugs are made in the U.S.A.
BEFORE ORDERING:WE WILL NEED TO KNOW WHAT SIZE PISTONS YOU WILL NEED. WE ALSO NEED BEARING SIZES FOR RODS AND MAINS. YOU CAN SELECT YOUR PROPER SIZE ON THE UPPER RIGHT CORNER OF THIS PAGE.
WE DO EXCHANGE UNOPENED PARTS, ALL BOXES ARE CLEARLY MARKED ON THE OUTSIDE WITH THE SIZE, CHECK
AND VERIFY EVERYTHING BEFORE OPENING THE BOX. WE RECOMMEND KNOWING YOUR
SIZES BEFORE ORDERING. BEFORE DOING ANY BORING ON ANY BLOCK, YOUR
MACHINE SHOP SHOULD HAVE THE PISTONS IN ORDER TO FIT THEM CORRECTLY.
YOU ORDER STANDARD SIZE PISTONS PLEASE UNDERSTAND THAT WE DO NOT
EXCHANGE STANDARD SIZE PISTONS ANY LONGER. THE REASON FOR THIS IS THAT
MOST OF THE BLOCKS NEED TO BE OVER-SIZED FOR THE CORRECT CLEARANCES.
Contact our Tech support line for further information: 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!