K&N Valve Cover Breather Front With Adapter 20R/22R/RE/RET
K&N Breather Front w/Adapter-20R/22R/RE/RET(Valve Cover)
 
Our Price: $34.95

Part Number: 3035040
Qty:

Details Fitment
 

K&N Valve Cover Breather

(Front of Valve Cover w/ Adapter)

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1370 crankcase vent filter has a K&N embossed chrome-plated steel top with a black rubber base. The 1 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. This K&N Rubber Base Crankcase Vent Filter and adapter is designed to clamp directly to metal nipple on the front of the valve cover. When using dual carburetors or performance type single carburetors, this Crank Case Breather (with chrome top), should be installed in place of the vent tube located at the front of the valve cover just behind the oil filler cap. We also offer a breather that will fit in the factory PCV grommet for race applications.

Features:

  • 1 inch zinc tube
  • Chrome-plated steel top and rubber base
  • Mounts directly into rubber grommets in valve covers
  • Washable and reusable filter media

Specifications:

  • Flange Inside Diameter: 1 in (25 mm)
  • Height: 1.5 in (38 mm)
  • Outside Diameter: 2 in (51 mm)
  • Filter Material: Non-woven Synthetic
  • Top Material: Chrome
  • Top Style: Metal
  • Product Style: Rubber Base Crankcase Vent Filters
  • Flange Length: 0.625 in (16 mm)
  • Flange Type: Centered
  • Flanges: 1
  • Weight: 0.2 lb (0.1 kg)
  • Product Box Height: 2.2 in (56 mm)
  • Product Box Length: 6.1 in (155 mm)
  • Product Box Width: 4.1 in (104 mm)
  • Inner Wire: No

NOTE: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle. The New K&N Filters will not come with oil like the good old days.


This product should not be used in a manner that violates Federal EPA Laws.


Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 92 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 K&N Breather with adapter. May 10, 2022
Reviewer: Robert Copeland from Social Circle, GA United States  
Works great!  Had been running a homemade tube with generic knock off filter like this one at the end jn a can and was never pleased with it as it always leaked some oil into the can. This works perfect,  fits as described with no leaks.   Definitely recommended!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Breather May 10, 2022
Reviewer: Scott Harenberg from Minden, NV United States  
It’s a great product from k and n works good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 9, 2022
Reviewer: Keith Maddox from Perry Ga.  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Breather May 2, 2022
Reviewer: Randy from Inarajan, Guam  
Great product!!! Two thumbs way up!!! Always great doing business!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 2, 2022
Reviewer: Anthony Cleeton from COBAR, NSW Australia  


Was this review helpful to you?

View All Customer Reviews