LCE Pro Fuel Injection Kit #2 4 Cylinder
LCE Pro Fuel Injection Kit #2 4 Cylinder
 
Our Price: $1,389.00

Part Number: 1063024


Which Engine Platform Do You Have:*:

Pro Fuel Injection Extra Options

A/C Fast Idle / Cold Start Relay:
[Add $79.95]

LCE Pro Fuel Injection Fan Relay:
[Add $29.95]

LCE Pro Fuel Injec. Fuel Pump Relay:
[Add $29.95]

22RE Pro 8.5mm Spark Plug Wire Set:
[Add $68.95]

2RZ/3RZ Pro 8.5mm Spark Plug Wires:
[Add $146.95]

K&N Oval Straight Filter (Attaches:
[Add $53.99]

Wideband AFR Combo:
[Add $199.99]

Knock Sensor Upgrade:
[Add $129.99]

Qty:  
Details Fitment
 

Pro Fuel Injection # 2

The affordable engine management system that you can program! LC Engineering is now offering Pro Fuel Injection Kits for the Toyota 22R / 22RE / 2RZ / 3RZ engines in three different configurations. Based on the SDS EM-4 system, the LC Engineering Pro Injection Kit is a fully programmable, stand alone, engine management system designed to replace the factory Toyota injection computer or convert your carbureted engine to fuel injection using an OEM EFI intake manifold injectors and throttle body. It provides excellent results with naturally aspirated engines, superchargers, turbochargers and all types of fuels in both off-road and street applications. This system does not require expensive software or a laptop computer for the programming. Using speed/density airflow metering, the LC Engineering Pro Injection allows you to eliminate the bulky and restrictive OEM air flow meter. Full sensor diagnostics and programming are available in real-time. Our systems are designed to be easier to install and program than any other unit on the market today. All systems come complete with a plug-in main wiring harness and a custom tailored injector harness so you don't have to cobble them together from individual parts.

This kit will control fuel and ignition and can use any style distributor and an aftermarket ignition system; such as our Crane Pro-Street or Pro-Race ignition kits. The Pro Fuel Injection kit #2 offers control of both fuel injection and ignition timing in a single, integrated package. Ignition is crank triggered with capability to 9750 rpm. Fuel and timing values are fully programmable and have ignition retard capability under boost or nitrous activation. OEM style ignition wires can be used. The system is configured to trigger an aftermarket ignition box, such as the MSD-6A or Crane Fireball Hi-6, directly from the ECU. 2 step rev limiters are compatible with this system. This system does not include ignition coil or coil pack like the #3 system.

Kit Includes:

  • Simple Digital System ECU
  • Billet Plate Kit (Kit # 2)
  • LCD Programmer
  • Main Wiring Harness
  • Air Temp Sensor
  • Fuel Trim Control, +/- 50%
  • Water Temp Sensor
  • Injector Harness
  • Comprehensive Manual

NOTE: Will not come with a TPS connector. We can suggest one of ours 1063039 or 1063034 for the 22RE platforms.


This product should not be used in a manner that violates Federal EPA Laws.


Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
22RE Throttle Position Sensor Plug with Wires 1989-1995 22RE Throttle Position Sensor Plug with Wires 1984-1988
Our Price: $34.95

Add
Our Price: $34.95

Add
22RE Throttle Position Sensor Plug with Wires 1989-1995 22RE Throttle Position Sensor Plug with Wires 1984-1988

Share your knowledge of this product with other customers... Be the first to write a review