Main Bearing Set Coated

(Standard)

Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with little or no significant damage. Engines in race cars that have wrecked and lost oil pump drive belts have been able to pit for repairs, replace their belts and be back on track to finish the race and finish well. Engines overheating from cooling system failure to the point of oil breakdown have avoided the destruction of expensive components (block, rods, and crankshafts) due to the secondary lubrication provided by the .0002 to .0004 inch layer of CT-1 dry film lubricant. Thus, eliminating downtime associated with these types of engine failures. Reduce catastrophic engine failures and last longer than uncoated bearings.

NOTE: No returns accepted for Standard size bearings. Make sure your crank is within spec before ordering.

Contact our Tech Support Line for further information at 928-855-6341.