NGK 5mm Spark Plug Wires
(w/ Post Style Aftermarket Coil)
We realize not every engine is a race engine. Don't overspend on features that you can't use. The NGK spark plug wires are perfect for the street were high RPM's are not sustained and upgraded ignition are not used. NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by "scrambling" and breaking up the electrical waves radiated by the firing of the spark plugs.
A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter vs. 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.At the center of NGK Resistor Spark Plug Wire Sets is a fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance.
High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit (not universal fit like other major wire manufacturers). Each NGK ignition wire is fitted with a positive locking, corrosion resistant Stainless Steel terminal end for tight fit and maximum resistance to vibration and separation. NGK Wire Sets are numbered for easy cylinder identification and coil wires are color coded for correct and easy installation.
- Superior Firing and Fuel Savings
- Outstanding Durability
- Consistent Performance
- Excellent Noise Suppression
- 7mm Wire
- Uses The Stock Plug Wire Hold Downs
NOTE: We always recommend the use of our Race Wires for any highly modified late model engine that is electronically managed. Race or street engines can also use our Pro Wires to improve ignition performance, see Part #: 1083012.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.