Home > AXLE > GEARS & LOCKERS > 1979-1995 Gear Sets >

Ring & Pinion Set 5.71 7.5"
Ring & Pinion Set 5.71 7.5" IFS

Our Price: $229.95

Part Number: 1091111


Ring & Pinion Set 5.71 7.5"

  • Differential: Toyota 7-1/2"
  • Ratio: 5.71
  • Tooth Count: 40-7
  • Manufacturer: Nitro Gear
  • Material: 8620 Steel Forgings
  • Warranty: 2 Years
  • Pinion Spline Count: 23
  • Number of Ring Gear Bolts: 10 (NOT INCLUDED)

Vehicle Application:

  • 1979-1995 Toyota 2wd Hilux Pickup Rear
  • 1986-1995 Toyota 4wd 4x4 Hilux Pickup IFS Front
  • 1986-1995 Toyota 4Runner 4wd 4x4 IFS Front
  • 1995-1/2-2004 Toyota Tacoma 2wd Rear (Non Prerunner)
  • 1993-1998 Toyota T100 4wd 4x4 IFS Front
  • Toyota Supra Rear (Non Turbo)

What gear ratio do I need?

Differential Gear Ratio determines the number of times the drive shaft (or pinion) will rotate for each turn of the wheels (or ring gear). So if you have a 3.73:1 gear ratio the drive shaft turns 3.73 times for every turn of the wheel.

Gear ratio is calculated by dividing the number of teeth on the ring gear by the number of teeth on the pinion gear. The higher the number, the lower the ratio: a 5.29 gear has a lower ratio than a 4.10 gear. With a lower gear ratio the drive shaft (and thus the engine) turns more for each revolution of the wheel, delivering more power and torque to the wheel for any given speed. Lower ratios are generally desirable when going off-road. Higher ratios are better for freeway driving since they run at lower RPM’s and offer better fuel economy.

Changing tire size affects the final drive ratio. Switching from a 30" tire to a 35" tire changes the final drive ratio by about 17%. This may drop the engine out of its' "power band" and result in poor performance and fuel economy. To restore performance you must change the gear ratio to compensate for the change in tire size. If you originally had 3.07 gears you need a ratio that is approximately 17% lower, such as 3.55. If you want to increase off road performance you might want a 4.10 or lower ratio.

If you have a 2wd truck, you will need to confirm that your rear axle housing is either 7.5" or 8".

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AXLE > GEARS & LOCKERS > 1979-1995 Gear Sets