Home > ENGINE > BOTTOM END > Bearings > Main Bearings >

SAFETY Main Bearing Set - 22R 1975-1981 STD
SAFETY Main Bearing Set - 22R 1975-1981 STD


 
Our Price: $36.95

NOTE:: Usually Ships in 1 to 2 Business Days
Part Number: 1013810
Qty:

Details
 

SAFETY Main Bearing Set - 22R 1975-1981 STD

When overhauling/rebuilding an engine, it is highly recommend that you replace all bearings in the bottom end.
These bearing sets will get your engine back to the proper specification, and ready for the miles to come.

The majority of Safety Bearings are produced by the Japanese factories that manufacture original engine bearings found in modern import engines like Toyota's. This ensures the performance and durability of our bearings to meet the demands of even the most stressful engines. We at LCE offer main bearings, rod bearings, thrust washers, and pin bushings to serve all your engine bearing needs.

Why Safety Bearings?
Safety Auto Parts Corp. is dedicated to ensuring that their bearings are of the highest quality available in the aftermarket. Just as the factories have strict standards of quality for the OE engines bearings they produce, Safety enforces similar standards of quality to provide our customers with bearings that are as close to OE as possible. Many of our competitors offer cheaper solutions at the cost of lower quality products. At LCE, we strive to offer the highest quality possible and also offer it at affordable prices.
Try our products and the difference will be immediately obvious.

**No returns accepted for Standard size bearings, make sure your crank is within spec before ordering**

MAIN BEARING SIZE

CRANKSHAFT RANGE

Standard Bearing

2.3616 in - 2.3622 in

59.984 mm – 60.000 mm

.25 mm (+.010")

2.3517 in – 2.3523 in

59.735 mm – 59.750 mm

.50 mm (+.020")

2.3418 in – 2.3425 in

59.487 mm – 59.502 mm

.75 mm (+.030")

2.3320 in – 2.3326 in

59.238 mm – 59.253 mm

MAIN BEARING OIL CLEARANCE

20R

0.0010 in - 0.0022 in

0.025 mm - 0.055 mm

22R/RE

0.0010 in - 0.0022 in

0.025 mm - 0.055 mm

RACE OR HIGH PERFORMANCE / TURBO

0.0020 in - 0.0030 in

0.050 mm - 0.076 mm

OIL CLEARANCE NOT TO EXCEED 0.0031 in OR 0.078 mm


Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ENGINE > BOTTOM END > Bearings > Main Bearings