Experience the benefits of hydro assisted steering with a range of rams for a full spectrum of applications. Our Single-Ended Ram models are available in 6" stroke versions for Toyota steering knuckles and 8" stroke versions for Dana-style knuckles. They all have high-temperature inner and outer seals for high-performing longevity.
Rod-ends for these Rams are sold separately. The 1-1/2" and 2" bore Rams have a 3/4" diameter rod that will accept a 3/4" female rod end. The 2-1/4" bore Rams have a 1-1/8" diameter rod with a 3/4"-16 pitch threaded hole in its end to accept 3/4"-16 threaded male rod ends.
Features:
NOTE: Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid is not recommended and will void the warranty.
Force With 1650 PSI Pump
RAM Type
Cylinder O.D.
Bore
Knuckle Type.
Stroke
Rod Diameter
Shaft Side (Retraction)
Non-Shaft Side (Extension)
Single-Ended
1-7/8" (48 mm)
1-1/2" (38 mm)
Toyota
6" (152 mm)
3/4" (19 mm)
2186 lbs (992 kg)
3888 lbs (1764 kg)
Dana
8" (203 mm)
2-3/8" (60 mm)
2" (51 mm)
4455 lbs (2021 kg)
5184 lbs (2351 kg)
8" (203mm)
2-5/8" (67 mm)
2-1/4" (57 mm)
1-1/8" (29 mm)
4920 lbs (2232 kg)
6560 lbs (2976 kg)
Double-Ended
Contact our Tech Support Line for further information at 928-855-6341.