Solid Axle Swap Kit +4" 1995-2004 4wd Tacoma (Kit A)
Solid Axle Swap Kit +4" 1995-2004 4wd Tacoma (Kit A)

Our Price: $1,826.95

Part Number: 2051169

Would You Like To...

Add a Knuckle Pull Scale*:

Add a 54mm Axle Socket*:


Solid Axle Swap Kit +4" 1995-2004 4wd Tacoma (Kit A)

The Tacoma SAS Kits for 1995-2004 Tacomas are complete, user friendly, and affordable. Check out all our suspension kits for even more Tacoma suspension parts!!

We will have three different Solid Axle Swap Lift Kits:

  • *Kit (A) will be non axle-specific
  • *Kit (B) will be Toyota axle specific, with all the fixings
  • *Kit (C) will be axle specific for the Rock Assault Tacoma axle housing

The first addition to the Tacoma SAS Kit family will be Kit (A), a kit that is not axle specific, but comes with everything else you will need to hang an axle from your Tacoma. We have included everything you will need to remove your OEM rack and pinion steering and bolt up an IFS box from an 86-95 mini truck or 4Runner.

The kit includes frame tubes and frame tube jigs as well as the front spring hanger, so hanging the leaf springs will be a simple as following the step by step, illustrated instructions. The stock front bumper can also be reused with this kit. All gussets and frame supports are included so the Tacoma will be much stronger when you finish with the build than it was from the factory. After installing this kit all that is left to do is pick an axle housing and hang it from the leaf springs.

Kit Includes:

  • *Front Spring hanger
  • *Front Springs (Your choice)
  • *All spring and shackle bushings
  • *Shock Hoops
  • *5125 Bilstein Shocks (Your size choice)
  • *Frame Tube Jigs
  • *Frame Tubes
  • *Shackle mount Kit
  • *Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
  • *Steering shaft
  • *Steering couplers
  • *Fire wall plate
  • *Bump stop kit

Application Note:

  • *For single case applications, a high clearance t-case crossmember is required. Check out part #2051190.
  • *Depending on your lift and flex you may need to use a T-100 oil pan, p/u tube, dipstick tube and dipstick. 3RZ engines will use part #1013243 and 5VZ engines will use part #1013246.
  • *This kit will require the shorter radiator to clear the front spring hanger. See part #1094023.
  • *This kit is designed to use an 85-95 IFS style steering box (box not included in kit).
  • *Also check out our rear lift kit part #2051180

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: