Home > ENGINE > TOP END > Valve Train Components > Valve Train Kits >

Stage 3 Master Valve Train Kit 2RZ/3RZ
Stage 3 Master Valve Train Kit - 2RZ/3RZ
Includes: 34mm Buckets, 1mm Oversized Valves, Dual Valve Springs, Spring Seats, Titanium Retainers, Hardened Keepers & Viton Valve Seals


 
Alternate Views:


Our Price: $1,219.95

NOTE:: Usually Ships in 2 to 3 Business Days
Part Number: 1021506


Spring Selection*:


Qty:
Details
 

Stage 3 Master Valve Train Kit - 2RZ/3RZ

Includes: 34mm Buckets, 1mm Oversized Valves, Dual Valve Springs, Titanium Retainers, Hardened Keepers & Viton Valve Seals

LC Engineering has taken the guesswork out of your 2RZ/2RZ valve train. These valvetrain kits will supply you with all the compatible parts to upgrade the valve train on your performance engine. The Stage 3 Master kit includes our 34mm shim under buckets, Stainless Steel/Inconel valves(+1mm), Pro dual valve springs, spring seats, titanium retainers, hardened keepers and Viton valve seals. This is an excellent kit to work with our Stage 3 or larger camshafts.

34mm Cam Buckets
The 34mm cam buckets allow you to run a larger cam profile. These buckets will also upgrade your valvetrain to a "shim under" style. That means you can run our Pro 8mm shims under the bucket instead of on top. This help keep the valve train lighter and more stable. ****Bucket Bores will need to be machined to use the larger 34mm Buckets, these will not work on stock factory bucket bore****

Intake & Exhaust Valves
These valves are 1mm larger than stock (Intake 38.5mm / Exhaust 31.5mm) and work great for ported street heads that don't need the huge oversized valves. These stainless steel valves are lighter than the stock steel valves and have a special anti-friction coating to promote better airflow across the valve as well as reduced resistance in the guide, resulting in better valvetrain stability. These valves will work with the stock seats once a performance valve job has been performed. Although we recommend using our Pro Valve Seats on any high boost (25psi+) or race applications.

Pro Dual Valve Springs
You have the option of our Pro Dual Valve Springs or the Pro HD Dual Valve Springs:
- The Pro Dual Valve Springs give you 75lbs of seat pressure at a 1.400" install height and an open pressure of 215lbs (at .450" lift) they will work perfectly with any naturally aspirated or low boost application (0-20 lbs of boost). These springs are rated up to 8,000 RPM and will accommodate cam lifts up to .455".
- The Pro HD Dual Valve Springs give you a whopping 100lbs of seat pressure at a 1.400" install height and an open pressure of 225lbs (at .450" lift) they will work perfectly with any high boost application (over 20 lbs of boost). These springs are rated up to 10,000 RPM and will accommodate cam lifts up to .515".

Valve Spring Seats
These valve spring seats will sit on top of your stock spring seat and allow you to run our dual valve springs without having to modify your head.

Titanium Retainers
LCE Titanium retainers are lighter and stronger than steel. Additionally, our Titanium design gives you confidence; no longer will you be worried about splitting a retainer and tearing up an engine when turning over 8,000 RPM. Titanium retainers are American made out of space age material. Titanium is less than half the weight and ten times stronger than the factory steel retainer, these Titanium retainers allow you to use high lift cams without the chance of failure. From a standing idle to the most extreme rpm, our Titanium retainers perform flawlessly, without compromise.

Hardened Keepers
Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium Retainers. A must for high rpm applications!

Viton Valve Seals
Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil leakage past the seal. They ensure a perfect seal for maximum performance and long engine life.

NOTE
This kit will require our 8mm pro valve shims. Shims not included with the kit due to various shim requirements. Customer will need to mock up their own valve train and determine what size shims they need (to be purchased separately). Machine Work WILL be REQUIRED to modify bucket bores.

Contact our Tech support line for further information: 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Newsletters! Or try our new web site LCEPerformance

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.


Share your knowledge of this product with other customers... Be the first to write a review