Home > EXHAUST > Headers > ALL Headers >

LCE Street Header Kit 2wd Custom Fit 22R/RE 1982-1984
Street Header Kit 2wd Custom Fit  22R/RE 1982-1984

Our Price: $399.95

Part Number: 1041033

1042104 Header 2 Wheel Drive (Included)

Header Connector:
1041008 2 Bolt Stub Conector (Included)

Header Gasket Set:
1040012 Gasket Set (Included)

Header Stud Set:
Header Stud Set #1045030 [Add $15.00]

Header Air Injection Block Plates:
Air Injection Block Plates #1045000 X2 [Add $15.00]

Oxygen Sensor Block Plate:
Oxygen Sensor Block Off #1045003 [Add $5.00]
O2 Relocation Kit Only For 1984-1988

O2 Relocation Kit:
O2 Relocation Kit Only For 1984-1988 #1065035
Optional Parts For Pre 1988 Models

Universal Heated O2 Sensor #1065034*:

Street Header Kit 2wd Custom-Fit 22R/RE 1982-1984 Pickup
***Not for 4 Runners***
50 State Legal C.A.R.B. EO: D-462-1

Some people don't know it but a header makes the most power gain with a single bolt on part with no need of complicated and super expensive modifications to your vehicle. It increases an average of 10-15HP on your engine by increasing improved flow in the exhaust system (Logic says: the faster everything comes out, the faster everything can come in).

There are many headers in the market these days, probably cheaper, but they are far from better. LC Engineering has been producing, testing, installing and designing these headers for more than 20 years. so we can assure you that there is not a better header for a Toyota 22 engine series out there on the market. So after installing your LC Engineering Street header on your Toyota you will know why we still the #1 header around, why race and off-road enthusiasts prefer us and why we are worth the extra expense.

Our most popular product are the street header kits. LCE uses all 304 1 1/2" Stainless steel tubing, 16 gauge .065 wall, the collector is made in house with 409 Stainless steel. A huge 1/2" thick steel header to head flange and 3/8" steel flange with 2 1/4" opening at the collector that accepts the stock Toyota round exhaust gasket. As if that were not enough, the whole package is coated in a high temp ceramic coating. To make the install easy on you LCE supplies you with all the gaskets needed to bolt your header on your vehicle. Our header flanges are cut to allow the use of OEM exhaust manifold gaskets. These gaskets feature a metal crush fire ring and a heat deflector for the plug wires. No cheap paper gaskets to blow out with a LC Engineering Header.

This header kit is a designed for a custom-fit exhaust for 1982-1984 2 Wheel drive trucks. Does not include a connector pipe to connect to the factory catalytic converter. This kit includes a stub flange that will allow you to weld a custom exhaust from the header collector back. If you have to pass emissions where you are located, or if you want to hook your air injection back up to this header you will need to purchase our air injection adapter kit Part#1040000. If you do not wish to run the air injection you will need to get the air injection block off plate kit Part#1045014.

*All Toyota Pickups and 4Runners manufactured before 1988 have a factory non-heated single wire oxygen sensor. When installing our Street Header Kit you will notice that the oxygen sensor provision has been moved downstream from its factory location. We recommend that anyone with a pre 1988 application utilize our universal 4 wire heated O2 sensor in replace of there factory single wire. This will not only improve the signal but the gas mileage as well as the performance of the vehicle. Vehicles made from 1988-1995 should have a factory heated O2 sensor and should not need to change it unless their factory one is damaged.

If you vehicle needs to pass Calif Smog, you will need the Air Injection Adapter if not running a header with side feed Air Injection, as well as the Heat Riser, both listed above.

***Not for 4Runners as they are built on a 4wd chassis***

Universal Heated O2:

Fitment is for both the automatic truck and manual transmission.

This Complete Kit Includes:
  • 2WD (82-95) Street Header
  • Collector Flange Stub- For custom header-back exhaust fabrication (1041007)
  • Street Header Gasket Set (1040012)

Options For Header:

  • O2 Sensor Extension (1065035) No Charge, Only Needed for 1984-1988
  • O2 Block Plate Kit (1045003)
  • O2 Sensor Install Kit (Includes studs, nuts, gasket, and weld-on flange)(1045035)
  • O2 Sensor Extension (1065035)
  • Header Air Injection Block Off Plates (1045014)
  • Header Stud Set (1045030)
Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Suggested with your install...
Heat Riser Kit - 20R/22R Air Injection Adapter Kit - 22R/RE(81-84)
Our Price: $34.95

Our Price: $99.95

Heat Riser Kit - 20R/22R Air Injection Adapter Kit - 22R/RE(81-84)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

EXHAUST > Headers > ALL Headers
EXHAUST > Headers > LCE Headers > 2WD LCE Headers