Street Stroker Kit - 22R/22RE With H-Beam Rods 1981-1995
What is a stroker crankshaft? It's 5mm more stroke! (Thats 1/4 of an inch.) Usable power is what the stroker crank will give your engine. It increases the torque of the 22R engine as much as 25 FT/LBS. This means more pulling power for a 4x4 application or increased acceleration for your circle track car. Best yet, you can use this with any type of engine set-up, including the factory EFI system with no adverse side effects. High compression or low compression, we have the pistons to make the stroker crank work for your application.
When 300 horsepower or more is expected, a stronger rod is recommended. LCE Pro Chromoly H- Beam Rods will fit the bill. LCE H-Beam 4340 Forged Chromoly Steel Connecting Rods are manufactured from a two-piece forging process. This process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the rod. LCE includes a higher content of nickel & chrome, which increases the strength & fatigue life without making the rod brittle. Every rod is shot peened to stress relieve the metal. LCE x-rays, sonic tests and magnafluxs each rod to insure quality.
LC Engineering has a full line of performance crankshafts for every 22R/22RE application. All crank shaft cores are tested and inspected for imperfections before we begin working on them. Only the most select cranks are used for our production. All crankshafts are priced outright. No core charges!
LCE recommends to use with our Crank Scraper P/N: 1013022
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.