Street Stroker Kit - 22R/22RE With H-Beam Rods 1981-1995
Street Stroker Kit With H-Beam Rods
 
Our Price: $1,314.99
Shipping Delay: Usually Ships in 5-6 Weeks

Part Number: 1010036

Select Your Options For Your Stroker Kit...

Thrust Bearing Selection*:


(93mm / +.040") Piston Selection*:


Stroker Main Bearing*:


Qty:  
Details Fitment Instructions
 

Street Stroker Kit With H-Beam Rods

What is a stroker crankshaft? It's 5mm more stroke! (That's 1/4 of an inch.) Usable power is what the stroker crank will give your engine. It increases the torque of the 22R engine as much as 25 FT/LBS; this means more pulling power for a 4x4 application or improved acceleration for your circle track car. Best yet, you can use this with any engine set-up, including the factory EFI system with no adverse side effects. High compression or low compression, we have the pistons to make the stroker crank work for your application.

When 300 horsepower or more is expected, a stronger rod is recommended. LCE Pro Chromoly H- Beam Rods will fit the bill. LCE H-Beam 4340 Forged Chromoly Steel Connecting Rods are manufactured from a two-piece forging process. This process forces the grain into the shape of a connecting rod, resulting in superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the rod. LCE includes a higher content of nickel & chromium, which increases the strength & fatigue life without making the rod brittle. Every rod is shot peened to stress relieve the metal. LCE x-rays, sonic tests, and Magnaflux's every rod to ensure quality.

LC Engineering has a full line of performance crankshafts for every 22R/22RE application. All crankshaft cores are tested and inspected for imperfections before we begin working on them. Only the most select cranks are used for our production. All crankshafts are priced outright. No core charges!

LCE recommends using this with our Crank Scraper Part# 1013022.


This product should not be used in a manner that violates Federal EPA Laws.


Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
Tools - Ring Compressor Cone (3.580" - 3.675") Tools - Piston Ring Installing Pliers Tools - Adjustable Piston Stop
Our Price: $69.95

Add
Our Price: $13.95

Add
Our Price: $15.95

Add
Tools - Ring Compressor Cone (3.580" - 3.675") Tools - Piston Ring Installing Pliers Tools - Adjustable Piston Stop

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 High quality can’t wait to get it in April 8, 2021
Reviewer: Kobey Lyman from Placerville , CA United States  
.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 . September 14, 2018
Reviewer: Dennis White from Dayton, NV United States  
.

Was this review helpful to you?