URD MK3 Supercharger kit for 2005-2015 Tacoma 2.7L 2TR-FE 4 Cylinder
This kit is not CARB approved and is NOT legal in California. This kit is for off road and racing use only.
- More power than any other supercharger system
- Basic kit uses the Rotrex C30-94 Supercharger
- Includes high Quality Engine Management preprogrammed (also end user tunable)
- Huge 61# additional fuel injector and 190 LPH fuel pump with external fuel filter conversion
- Silent Operation
- Turbo style blow off valve
- Large air-air inter-cooler
- Outstanding fit and finish
- Easy installation
- Off road snorkel compatible
- Off road winch bumper friendly
URD has released this advanced supercharger system for the 2005 and
later Tacoma with the 2.7L 2TR-FE 4 cylinder engine. It is the highest
performing supercharger system available for this application.
This system uses a very large air-to-air inter-cooler to cool the
compressed air from the supercharger for greater power potential. The
mounting of the inter-cooler is high in the grill area to make it more
compatible with off road winch bumpers.
Our development vehicle was a 2009 Tacoma with the 2TR-FE 2.7L engine
and a manual transmission. The truck had an off road lift and larger
than stock tires. The before dyno using a DynoJet chassis dyno was 117
RWHP. The after dyno was 248 RWHP. The after dyno was done without the
catalytic converters installed and the Stage 2 pulley.
The system includes everything you need for proper installation and operation. The main components are:
- Rotrex C30-94 Supercharger w/85mm pulley
- Self contained Rotrex supercharger oil system with large oil cooler
- Custom length belt
- Precision made charge piping made from mandrel bent aluminum
- URD 190 LPH fuel pump with external filter conversion
- Denso Iridium Power Spark Plugs
- All stainless fasteners where possible
- All silicone couplers with a custom URD supercharger inlets boot
- HKS SSQV turbo style blow off valve
- Drive belt idler pulleys
- Supercharger mounting bracket
- Additional injector fueling system
- High end preprogrammed engine management that is end user tunable
- Detailed installation instructions
This kit is designed to fit the Tacoma PROPERLY and does not need any
modifications for proper installation. The fit and finish on all the
parts is second to none.
URD has chosen the highly efficient Rotrex C30-94 supercharger as the
center of this supercharger system. The Rotrex is most advanced
supercharger design on the market today. It features a small compact
foot print with almost completely silent operation, with a very highly
efficient traction roller drive system that will spin the turbo type
impeller 9.4 times faster than the belt drive pulley is turned. This
high step up ratio and small diameter turbo style impeller brings boost
in sooner than other more common types of centrifugal superchargers.
This gives you very nice off the line performance combined with
unmatched top end power. The Rotrex Supercharger features it own self
contained oiling system using Rotrex's proprietary traction oil that is
the key to the advanced traction drive system. Rotrex warranties their
superchargers with an industry leading three year UNLIMITED mileage
The air intake system brings in cool air from the stock location in
the fender wall and into the stock air filter box. URD uses a custom
made silicone adapter to adapt the air filter box to the supercharge
inlet. The stock air filter box flows very well and it was retained to
keep the system noise to OEM levels and allow you to adapt in a off road
snorkel system if you want.
The overall operation of the supercharger system is nearly completely
silent, but we have added a turbo style blow off valve will announce
that your Tacoma indeed boosted. When the throttle is suddenly closed
when the engine is at high RPM like shifting gears with boost, the blow
off valve will cycle with a very crisp note typical of high performance
turbo systems. It is always a crowd pleaser!!
The kit includes all the needed brackets, parts, and fasteners to
allow a trouble free, no hassle installation. We include high quality
stainless fasteners where possible, and all the parts have a high
quality wrinkle black powder coating finish that will last and looks
fantastic. The piping is all mandrel bent high quality aluminum they
fit like they are supposed to. Only the best in kit components are
The installation on your Tacoma straight forward and the only
modification to the vehicle require is some slight trimming of the
radiator core support to pass the charge pipes through. No part of the
kit runs under the truck or frame and the skid plates do not even need
to be removed for installation.
We made every effort to make the system compatible with off road
winch bumpers. We can't guarantee compatibility with all bumpers on the
market, but several of our V6 kits have not had any problems with the
different winch bumpers on the market. The 4 cylinder kit uses the same inter-cooler as the V6 kits so all bumper compatibility will be the
Want even more??? The basic kit uses the Rotrex C30-94 supercharger,
but we have designed in expandability for those that want to go
extreme. The supercharger mounting bracket and belt drive is designed
to accept any Rotrex supercharger in the C30 series and the larger C38
series to include the new "Big Daddy" C38-91. The larger superchargers
will require a race built engine and your own engine management.
URD has worked very hard to bring you the finest supercharger kit for
your Tacoma and we are very sure you will be very happy with it!!
This dyno chart is from the Stage 2 with the higher boost pulley and the catalytic converters removed.
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!