2RZ Tacoma Power Package

This is the highest quality Stainless Steel Header for your 2RZ engine. The long tube design of this header is the best for horsepower and torque. The header kit for the 2RZ are made from 1-5/8" 304 stainless steel tubing, 16 gauge .065 wall, and feature 1/2" thick flanges at the head and 3/8" thick flanges at the collector. The 2RZ header has a 2 1/4" collector to bolt to the factory catalytic converter. For the best performance this header is ceramic coated for long-lasting great looks and lower under hood temps.

Pro Flow Exhaust

LC Engineering’s Pro Flow Exhaust Systems are made with 409 stainless steel tubing, a 409 stainless steel straight-through Street Max muffler and 3/8" thick mild steel flanges. The straight-through design of the Street Max muffler delivers a deep performance tone without the excessive interior drone or high-pitched external sound frequencies (rasp) while providing optimal flow for improved horsepower & torque. They are then ceramic coated for long-lasting good looks and protection from the elements. LC Engineering designs our kits to be a direct fit application that requires little or no modifications and uses factory exhaust hanger locations. This bolts up behind your factory catalytic converter or one of our high flow performance catalytic converters. This exhaust system features 2 1/4" tubing with a 3" polished stainless tip. Every kit is shipped complete with all the instructions and hardware you will need for a quick and easy installation process.

Features:

• Straight-Through Design
• 409-Grade 16 -Gauge Stainless Steel Construction
• Delivers A Deep Performance Tone
• High-Heat Thermal Mesh
• Improved Horsepower & Torque
• Effective Drone Reduction
• 3 Year Limited Warranty (Muffler)

Short Shifter

Does your shifter handle feel loose? Does it have a lot of play? Are you tired of reaching into the glove box to find 5th gear? LC Engineering's short shifter reduces the throw by over 40%, a span of 5" of movement! This short shifter kit allows you to keep the stock two piece style shifter handle which will reduce noise and vibration when compared to a one piece. These kits come with new heavy duty shifter end bushings as well as heavy duty shifter seats to replace the old worn out stock rubber seats.

Features:

• Shift throw reduced for quicker shifts.
• CNC machined billet aluminum spacer.
• Direct bolt on installation.
• No modifications to factory trim needed.
• Easy installation

K&N Intakes

57 Series 95-99

57 Series 00-04

77 Series 00-04

NOTE: 2RZ and 3RZ header kits are 49-state legal for all years, but only CARB legal in California for 95-99 Single Catalytic Converter trucks. Direct Fit on Manual Transmissions only. Automatic Transmissions may have to modify the Transmission Fluid Dipstick in order to clear the header. Kit will include all gaskets needed for proper installation. LC Engineering 2RZ/3RZ header kits are a direct fit on single catalytic trucks only. Trucks with dual catalytic converter applications will require modification to use LC Engineering's header kit. LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims.

Contact our Tech Support Line for further information at 928-855-6341.