Stage 5 Mini Valve Train Kit - 2RZ/3RZ
Includes: 2mm Oversized Valves, Valve Seats, Dual Valve Springs, Spring Seats, Titanium Retainers, Hardened Keepers & Viton Valve Seals
LC Engineering has taken the guess work out of your 2RZ/2RZ
valve train. These valve train kits will supply you with all the compatible
parts to upgrade the valve train on your performance engine. The Stage 5 Mini
kit includes our stainless steel intake valves and inconel exhaust valves(+2mm
oversized), Pro valve seats, Pro dual valve springs, spring seats, titanium
retainers, hardened keepers and Viton valve seals. This is an excellent kit to
work with our Stage 3 or 5 camshafts.
Intake & Exhaust Valves
These valves are +2mm larger than stock (Intake 39.5mm / Exhaust 32.5mm) These
stainless steel valves are lighter than the stock steel valves, and have a
special anti-friction coating to promote better airflow across the valve as
well as reduced resistance in the guide, resulting in better valve train
stability. It is highly recommended to unshroud the valve with bowl and chamber
port work when using oversized valves.
Inconel Exhaust Valves
These exhaust valves are made from a Nimonic 751 alloy which is much more
resistant to heat than a standard stainless steel valve. What that means to you
is that you don't have to worry about your exhaust valves getting damaged with
the higher exhaust temps you see on high performance engines. This is
especially important on boosted engines that see some pretty extreme exhaust
temps. It is highly recommended to unshroud the valve with bowl and chamber
port work when using oversized
Pro Valve Seats
Pro Valve Seats are made of Nickel Aluminum Bronze material for extra long life
in performance engines. These seats are triple the strength of factory cast
iron seats and will hold up to all types of fuels. When it comes to
dependability, these small details are part of the secret of why our engines
last so long!
Pro Dual Valve Springs
You have the option of our Pro Dual Valve Springs or the Pro HD Dual Valve
-The Pro Dual Valve Springs give you 75lbs of seat pressure at
a 1.400" install height and open pressure of 215lbs (at .450" lift)
they will work perfectly with any naturally aspirated or low boost application
(0-20 lbs of boost). These springs are rated up to 8,000 RPM and will
accommodate cam lifts up to .455".
The Pro HD Dual Valve Springs give
you a whopping 100lbs of seat pressure at a 1.400" install height and open
pressure of 225lbs (at .450" lift) they will work perfectly with any high
boost application (over 20 lbs of boost). These springs are rated up to 10,000
RPM and will accommodate cam lifts up to .515".
Valve Spring Seats
These valve spring seats will sit on top of your stock spring seat and allow
you to run our dual valve springs without having to modify your head.
LCE Titanium retainers are lighter and stronger than steel. Additionally, our
Titanium design gives you confidence; no longer will you be worried about
splitting a retainer and tearing up an engine when turning over 8,000 RPM.
Titanium retainers are American made from space age material. Titanium is less
than half the weight and ten times stronger than the factory steel retainer,
these Titanium retainers allow you to use high lift cams without the chance of
failure. From a standing idle to the most extreme rpm, our Titanium retainers
perform flawlessly, without compromise.
Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium
Retainers. A must for high rpm applications!
Viton Valve Seals
Viton Valve Seals are the latest in valve seal material, surpassing Teflon!
Heat resistant to 440 degrees, they eliminate oil consumption through the valve
guide and provide smoother engine idling by stopping manifold air and oil
leakage past the seal. They insure a perfect seal for maximum performance and
long engine life.