PDM USA

Transmission Repair Sleeve Kit 1GR and 3UR-FE

SKU: 1033093
0
(6 reviews) Write a Review
$298.96
Adding to cart… The item has been added

Transmission Repair Sleeve Kit

Kit Includes:

  • 303 Stainless Steel Sleeve
  • Set Screws & Hex Wrench
  • Oversized Release Bearing
  • Hi-temp Grease Packet
  • Notification Sticker
  • Instructions

Replaces Toyota Part #:

  • 31230-60230 (2005-2011 Models)
  • 31230-60241 (2005-2015 Models)

Does your pedal feel like it’s sticking? Are you having to replace your clutch & or release bearing more often than you should? We have a solution for you!

The Problem: These are the most common symptoms associated with a damaged or grooved quill on a transmission. It is also referred to as the snout, bearing carrier, or case extension. In most cases it is an integral part of the transmission case & cannot be replaced. The logical solution is to replace the case or the transmission. Both options are expensive & time consuming, neither of which solves the problem permanently.

The Cause: In the operation of the clutch, the release or throw-out bearing slides on the clutch snout or quill, allowing you to engage and disc-engage the clutch mechanism. Due to various reasons the quill becomes grooved over time. If the quill were made of a harder metal than aluminum, this would not be as common. The most common causes are: improper clutch adjustment, defective clutch assemblies, stop & go traffic, keeping your foot on the clutch (commonly referred to as riding the clutch), loss of lubricant, heat, & etc.

The Effect: The effects of these grooves on the clutch operation are catastrophic. They cause: premature clutch disc wear, premature bearing failure (further adding to the problem), sticky &/or jerky pedal travel, rattling clutch forks, transmission damage, etc.

The Solution: The Transmission Sleeve Kit (TSK) solves this problem by utilizing a sleeve, precision machined of 304 Stainless steel, which slips over the original quill. This provides a smooth, hard surface for the oversize bearing to slide on. It is anchored with set screws and is removable & re-usable. As in the case of the Subaru, it must be removed in order to allow any transmission repairs.

The Results: After installing the Transmission Sleeve Kit (TSK) you have eliminated the problem forever! You will notice a smooth, fluid like, feel to the pedal. Your engagements will be smoother. Your clutch will last longer. This in turn, will reduce the wear on your transmission. It will never groove again! The kit comes with a 1 year, unlimited mileage, warranty.

NOTE: For (6) speed manual transmissions only.



Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.

  • 2007-2014 FJ Cruiser w/ 6 Spd Transmission 4.0L-V6 1GR
  • 2005-2015 Tacoma w/ 6 Spd Transmission 4.0L-V6 1GR
  • 2005-2022 Tundra 5.7L-V8 w/ 6 Spd Transmission

6 Reviews Hide Reviews Show Reviews

  • 0
    5
    Solved Our Problem

    Posted by Unknown on May 6th 2024

    The repair sleeve worked and was easy to use. The shipping took a bit longer then expected so recommend pay for the faster shipping.

  • 0
    5
    FANTASTIC PRODUCTS AND SUPPORT!

    Posted by JAMES GILLESPIE on Jun 5th 2023

    This is not the first repair kit I have purchased. The products speak for themselves perpetually. This time was a bit of an emergency repair, and Ryan was very helpful in arranging rapid delivery to help my situation. Will definitely continue doing business with these guys!!

  • 0
    5
    Robert Anders give 5 stars

    Posted by Robert Anders on May 2nd 2023

    the sleeve fit perfect

  • 0
    5
    Great Service

    Posted by Daniel Antonelli on May 13th 2022

    After a little confusion on the part application online, a call into the sales department smoothed everything out and the rest went really smooth.The part was here on time and was correct. Thanks!

  • 0
    5
    Should have come from factory like this

    Posted by gk on Jan 5th 2022

    This is how this should have come from factory. Bearing has 2 grease channels factory one has none. Sleeve fit perfectly.

  • 0
    5
    PERFECT FIT GREAT QUALITY

    Posted by Ernie LAMONTAGNE on Apr 8th 2021

    .