The URD traction bar prevents the rear axle housing from twisting in
the leaf springs. This prevents the rear tires from hopping off the
ground when the wheels begin to spin, and provides much better and more
consistent traction for high-power starts and burnouts. This is very
important for quicker hole-shots and reduced reaction times.
The URD traction bar also prevents the rear axle housing from
twisting in the leaf springs during hard braking. And it provides
greater control when accelerating around a turn.
Our traction bar is a unique design that is completely bolt-on. It
consists of a very stout LASER cut and welded bracket that bolts to the
An adjustable torque control bar mounts to the bracket using
high-quality, greaseable polyurethane bushings, travels forward along
the propeller shaft, and mounts to the frame cross member that supports
the propeller shaft carrier bearing using a specially molded
polyurethane bushing. There is an adjustment on the rear of the torque
bar that will allow the user to adjust the preload on the springs to
provide the optimum hole-shot traction.
The traction bar comes with a high quality red powder coat finish.