Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...

PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Oil Pan This is a replacement oil pan for your Toyota Tacoma and 4Runner. Replacement for OEM Toyota Part #: 12101-75050 NOTE: This pan will use this drain plug. Contact our Tech Support Line for further information at 928-575-2174...

Oil Fitting (Block To Oil Filter) LC Engineering carries all the components you need to build your long block or service your old one. Specifications: 27mm Hex Head Thread pitch: 19mm x 1.5 (Block Side) & 3/4 - 16 (Filter Side) Contact...

Water Block Plate (Under EFI Manifold) This water block off plate goes under the intake manifold on fuel-injected 22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Motor Mount Conversion (Tig Welded) Tacoma V6 power is now a bolt-in option for the factory 4 cylinder trucks and 4 Runners! For the longest time, only factory 3.0 V6 trucks were likely candidates for the 5VZ-FE swap. Now the conversion from a 4 cyl...

Water Pump (w/o Cooler Tube) When rebuilding your engine or replacing the timing belt, it is always a good idea to include a new water pump. These are all new OEM quality Japanese-manufactured pumps. This pump will not have the auxiliary tube for the...

Balance Shaft Removal Kit This kit is designed to eliminate the balance shafts in a 3RZ or 2TR engine. Kit includes new bearings, replacement inserts, billet aluminum install driver, oil squirter to keep the chain properly lubricated, drill bit, and...

Balance Shaft Bearings Replacement balance shaft bearings for 3RZ or 2TR engines. NOTE: Sold as a set of (4). Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Brass Freeze Plug Set (7) At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to...

EFI Power Package for 1989-1995 22RE Trucks Is your Toyota longing for the step-up in power you need to get you over some of those big hills in 4th or 5th gear/overdrive? Tired of needing to downshift to pick up a little more speed? No need to look any...

Water Block Plate Kit (9 Bolt / Under Intake) This is the 9 bolt style water plate for the bottom of the 20R Cannon Downdraft Manifold. This kit comes with a billet aluminum water plate, mounting hardware, 3/8" npt plug and 90 degree fitting with a...