Model

Viton Valve Seals (Pro Guides) Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air...

Safety Auto Rod Bearing Set (.25mm / +.010″) When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification, and ready for the...

Trail Safe Inner Axle Seal Tired of dealing with oil leaks from your front inner axle seal? Trail-Gear has remedied that issue by offering our new Trail-Safe™ FJ80 Inner Axle Seal. The Trail Safe™ inner seal lip is totally supported by a garter spring...

Remote Fuel Pressure Regulator Line (-6JIC AN) Have you decided to upgrade to a killer Aeromotive Fuel Pressure Regulator? This line is for connecting your upgraded Aeromotive FPR for your 22re. That regulator is physically a bit bigger than the...

Thrust Bearing Set (Standard) These thrust bearings for the 2RZ and 3RZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on...

Thrust Bearing Set This is a replacement thrust bearing set for 1993-1997 Toyota Land Cruiser with the 1FZ-FE motor. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...

Front Strut Rod Bushings With the increased use of higher traction and performance tires on today's vehicles, soft original factory rubber bushings can very often cause the steering axis slant (caster alignment) to excessively and adversely change...

Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Kit Includes: (12)...

Stock Valve Guides (OE) When it comes to replacing valve train components, most people don't even think about the valve guides. If you have a high mileage engine or have bent a valve, it is most likely that your valve guides are damaged, we now offer...

Front or Rear Leaf Spring Bushings For high-performance applications, the combination of heavy duty or performance leaf springs and performance polyurethane spring bushings deliver the maximum benefit. For lighter-duty leaf springs they add a higher...

Radiator Outlet Hose LC Engineering is now offering an OEM radiator outlet hose. OEM Toyota Part #: 16572-35060 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...