Stainless Brake Lines (+3" Extended Length) LC Engineering is proud to offer D.O.T. stainless steel braided brake lines with a gray PVC cover using hose lined with Teflon, making it compatible with all brake line fluids on the market today. These lines...

Stainless Brake Lines (+6" Extended Length) LC Engineering is proud to offer D.O.T. stainless steel braided brake lines with a gray PVC cover using hose lined with Teflon, making it compatible with all brake line fluids on the market today. These lines...

Brake Master Cylinder (1" Bore) Are you upgrading your brakes from drums to discs? Are you just increasing the rotor size? Either way we both know that the Toyota's stopping power just doesn't seem to be up to today's standards. This brake master...

Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...

Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Bleeder Cap (Rubber) When you replace the bleeder screw, be sure to replace this rubber cap. This cap keeps dirt and other debris from finding its way into the hole in the bleeder. Clogged bleeder screws can be a pain when it comes to bleeding your...

Caliper Bolt This bolt is the perfect replacement to bolt your caliper to the spindle. After years of service, these bolts can end up stripped or damaged. This is just one of the many parts we carry for brake hardware. Contact our Tech Support...

Caliper Bolt Washer This washer is used with our replacement caliper bolts. Replace the washers when you replace the bolts. This is just one of the many parts we carry for brake hardware. Contact our Tech Support Line for further information at...

Dust Shield Eliminator Kit The brake backing plates can be a bother on front Toyota solid axles. They often get bent from trail damage and small rocks can get trapped between the backing plate and the rotor causing noise and damage. For many years we...

Stainless Brake Lines (Stock Length) LC Engineering is proud to offer D.O.T. stainless steel braided brake lines with a gray PVC cover using hose lined with Teflon, making it compatible with all brake line fluids on the market today. These lines will...

Swagelok (1/8" NP Male To 3/16" Tubing) These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go into most brake accessory ports. The opposite end has a...

Wilwood Proportioning Valve (Adjustable) This light and tidy, knob-type proportioning valves can be installed almost anywhere in the brake lines. They allow you to tweak brake bias in big or little increments simply by twisting the large adjuster knob...