Street Distributor - 22RE(91-92)
Street Distributor
LC Engineering has introduced a new line of distributors that come complete with new cap rotor and electronics. Save money over the OEM price with these all new complete distributors that will save time and money. Because rebuilding your distributor is an advanced project that requires specialized tools, and is beyond the scope of this DIY project this will save time in getting the 22R/RE back in running shape. Match the distributor with our Pro 8.5mm wire sets and get years of trouble free performance.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
(1)
Turbo Manifold - 22RTE Stock Replacement CNC Turbo Manifold w/ T/2 Flange For GT25 Turbo
CNC Turbo Manifold
(GT25 Turbo)
Anyone who owns or has owned a 22RTE (Turbo) Pickup or 4Runner understands how frustrating it can be to locate an exhaust manifold that is not cracked or damaged. Odds are that if you do locate one, they are not only expensive, but you really do not know how long it will last before it cracks again. LC Engineering has designed a factory replacement 22RTE turbo manifold that allows you to utilize all of your original factory equipment. The factory turbo will bolt directly onto this new manifold and all of the stock connections will hook up like the factory unit.
Rather than utilizing a casting process, we have put our machinists to work and built a Billet Steel CNC Manifold, and then finish it off with a High temp Black ceramic coating. Typically it is a challenge to design a CNC manifold that flows as well as a cast factory unit. Well, our team not only designed it to flow as well, but they exceeded the flow of the cast unit, which is without saying, an amazing accomplishment! Say goodbye to your Turbo manifold worries.
NOTE: This Manifold is designed to use with a Garret GT25 Turbo, If you want to use it with a CT-20, see Part #: 1041045. This Manifold is designed to be used with a stock 22RTE exhaust gasket, see Part #: 1044007.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
Holley Fuel Pressure Regulator (1-4lbs)
Holley Fuel Pressure Regulator
(1-4lbs)
The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by your vehicle. A faulty fuel pressure regulator can cause poor fuel mileage, rough running engine or starting problems. This is a simple way to keep your fuel system running right.
NOTE: You need this regulator If you're running the Weber electric fuel pump, see Part #: 1035046. If your application is a boosted blow thru carburetor setup, see Part #: 1035059. For the kit containing this regulator and a fuel pressure gauge, see Part #: 1035064.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
(2)
Pro Distributor With Out Vacuum Advance 20R/22R
Pro Distributor
(w/o Vacuum Advance)
When was the last time you checked your ignition timing? If you are like most people, it has been a while! An old worn-out distributor can cause major tuning issues along with robbing your performance. Time to upgrade to an LC Engineering Pro Distributor. These distributors are Brand New units that have been customized with custom springs and weights to achieve maximum performance. We re-curve these distributors to advance much quicker than stock to provide excellent throttle response and quick acceleration. The vacuum advance unit is removed so you have complete control over your ignition timing. LC Engineering recommends this distributor for racing purposes only.
The non-vacuum advance distributors are a "Must Have" for any high-performance application including; drag racing, circle track, and off-road applications. If you have a tamer application; daily driver or mild performance, then you will want to check into our Pro Distributors with vacuum advance.
- For carbureted applications only.
- This model adds approx 18°-20° at 2000-2200 rpm.
- Fits 20R engines with magnetic pick-up only. 20R engines with points style ignition will require replacing stock igniter with a MSD-6AL Digital Ignition w/rev Control, see Part #:1082026 along with a MSD Blaster 2 Coil, see Part #:1082032.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|
(11)
