High Pinion differentials are the strongest eight inch differentials that Toyota ever made, the only problem was that they are also the most expensive and the hardest to find. WE now have a High Pinion differential housing at an affordable cost. High Pinion differential housings are usually the best solution for fixing drive line angle issues, as the pinion is several inches higher than a standard 4cyl or V6 differential housing, and is also much stronger because it uses a reverse cut ring gear that runs on the stronger side of the gear.
Our high pinion housings are 100% new and no core is required, they come with all the necessary hardware: caps, cap bolts, adjuster wheels, lock tabs, and lock tab bolts, we even throw in the oil slinger. Housings are all new aftermarket and have been trail tested. With NO core charge to worry about!
Application Notes: High Pinion units should only be used in front axle applications. Use in the rear axle will lead to ring and pinion failure.
Contact our Tech Support Line for further information at 928-855-6341.
www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!