You are here: Home > T-100 > The Garage
Sort By:
Page of 1
Tools - Plastigage(.001" to .003") Tools - Plastigage(.001" to .003")

Tools - Plastigage Clearance Indicator(.001" to .003")

Made from a special extruded plastic thread with accurately controlled crush properties, Plastigage provides a fast and accurate way to check bearing clearances. Plastigage is packaged in a calibrated envelope that not only protects the plastic threads, but also serves as a scale to measure the bearing clearance. One package contains enough Plastigage to check both main and connecting rod clearance for one engine.

NOTE: This part number will measure clearance from .001" to .003" or .025mm to .076mm.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $5.49
T-Bolt Hose Clamp - 2" T-Bolt Hose Clamp - 2"

Our Price: $5.95

(1)
T-Bolt Hose Clamp - 1.75" T-Bolt Hose Clamp - 1.75"

Our Price: $5.95

(1)
Tools - 3mm Allen Wrench(Ball Head) Tools - 3mm Allen Wrench(Ball Head)

Tool - 3mm Allen Wrench(Ball Head)

This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle.

Also check out our complete TPS screw upgrade kit (part #1093082).

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $7.95
Silicone - Ultra Grey Silicone Sealant Silicone - Ultra Grey Silicone Sealant

Silicone - Ultra Grey Silicone Sealant

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers' performance requirements. Noncorrosive and low-odor. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids.

Guaranteed not to leak. Temperature range -65ºF to 500ºF (-54ºC to 260ºC) intermittent. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $8.95

(1)
Recessed 10mm Allen Socket, 3/8" Drive Recessed 10mm Allen Socket, 3/8" Drive

Socket - Recessed 10mm Allen Socket w/ 3/8" Drive

This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs (Part# 2053160 & Part# 2053162).

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $9.95
Tools - Allen Bolt Upgrade Kit For TPS Tools - Allen Bolt Upgrade Kit For TPS

Tool - Allen Bolt Upgrade Kit For TPS

One challenge to adjusting the TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC Engineering offers a TPS bolt upgrade kit to replace the stock TPS Phillips head screws with allen head bolts and then uses a ball-end allen wrench to loosen and tighten them. The ball headed allen wrench allows you to access the bolts at an angle instead of having to get to them straight on like the stock screws.

This kit will also help if you have damaged the stock screw heads trying to loosen them up. This kit contains two M4-0.7 x 16mm socket head bolts, four M4 flat washers and one 3mm ball head allen wrench. The screw length changed around on the stock applications so we supply you with screws to match the longest stock application and then you can use the supplied washers to shim them as needed for proper length.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $9.95

(15)
Lucas Oil Assembly Lube Lucas Oil Assembly Lube

Our Price: $9.95

(4)
Tools - Piston Ring Installing Pliers Tools - Piston Ring Installing Pliers

Piston Ring Installing Pliers

This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $12.95
Roll Bar Drink Holder Roll Bar Drink Holders

Roll Bar Drink Holders

Durable-padded holders attach to your 2-3" Sports Bars with heavy-duty hook and loop straps. Great products for every off-roader. Black only.

Features:

  • Black
  • Use with 2-3" sport bar
  • Heavy-duty hook and loop straps
  • Sold in pairs

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $12.99
TOYOTA Seal Packing 103 (FIPG) OEM Toyota P/N: 00295-00103 TOYOTA Seal Packing 103 (FIPG)

TOYOTA Seal Packing 103 (Formed-In-Place-Gasket)

OEM Toyota P/N: 00295-00103

TOYOTA OEM specified for oil pan and camshaft housing. Guaranteed not to leak. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $13.50

(3)
Hi-Lift Jack Rubber Isolator Hi-Lift Jack Rubber Isolator

Hi-Lift Jack Rubber Isolator

The Trail-Gear hi-lift jack rubber isolator is is the perfect fix for that hi-lift or hi-lift style jack you have rattling around in the back or your truck. The isolator slides onto both the jack and the jack handle keeping them from vibrating together and holding both components firmly in place.

Our Isolator is 100% rubber, black, and very durable. It not only keeps your jack from rattling, but it also keeps your jack handle from bouncing around and doing damage to you or your rig.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $13.95

(1)
Tools - Adjustable Piston Stop Tools - Adjustable Piston Stop

Tool - Adjustable Piston Stop

These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work in all vehicles that have a 14mm spark plug thread diameter.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $15.95

(1)
Aluminized Heat Sheath - .75" x 3' Aluminized Heat Sheath - .75" x 3'

Aluminized Heat Sheath - .75" x 3'

This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $17.95
Hitch Receiver Mounted Tow Hook Hitch Receiver Mounted Tow Hook

Hitch Receiver Mounted Tow Hook

This Hitch Receiver Mounted Tow Hook provides a quick and easy rigging point to attach snatch and tow straps for easy vehicle towing and recovery.

Features:

  • Black Powdercoat Finish
  • Fits any 2 inch standard receiver

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $17.99
Tow Strap Storage Bag Tow Strap Storage Bag

Tow Strap Storage Bag

This convenient storage bag is made out of 600 denier ballistic nylon with grab handles. The ends of the bag cinch down to secure the strap or open up for quick use of the strap. Will hold up to a 3" x 30' tow strap.

Features:

  • Made of nylon with grab handles
  • Holds up to a 3" x 30' tow strap
  • Sold individually

**DOES NOT INCLUDE TOW STRAP**


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $17.99
Recovery & Utility Trail Shovel Recovery & Utility Trail Shovel

Recovery & Utility Trail Shovel

The Recovery Utility Tool (RUT) is a fully functional collapsible Military Style shovel with easy grip and light handle with carbon steel blade that is heat treated for high strength and features double serrated edges for easy digging or cutting. The heavy-duty black powder coated body is 26 inches when open and folds to a mere 9 inches. It can be stored easily. Durable storage case included. It's rugged enough for the toughest of jobs. Never go on the trail without it.

Features:

  • Military style shovel
  • Black powder coat
  • Compacts to a mere 9 inches
  • Includes black canvas storage bag

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $19.99
Flip Socket (1/2" Drive) - 19mm & 21mm Flip Socket (1/2" Drive) - 19mm & 21mm

Flip Socket (1/2" Drive) - 19mm & 21mm

For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard sockets. Especially handy for custom wheels with tight lugnut openings. This socket is rated for use with an impact gun. 1/2" drive. (Extension NOT Included)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $20.95
Weld On Flat Tab Standard 1 1/2" Cope 10 Pack Weld On Flat Tab Standard 1 1/2" Cope 10 Pack

Weld On Flat Tab Standard 1 1/2" Cope 10 Pack

TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. Sold in 10 packs.

Available Options:

  • Tab, Standard, 1 1/2" Cope, Part # 2051421
  • Tab Standard, 1 3/4" Cope, Part # 2051422
  • Tab, Offset, 1 1/2" Cope, Part # 2051423
  • Tab, Offset, 1 3/4" Cope, Part # 2051424

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $21.95

(1)
Weld On Flat Tab Standard 1 3/4" Cope 10 Pack Weld On Flat Tab Standard 1 3/4" Cope 10 Pack

Weld On Flat Tab Standard 1 3/4" Cope 10 Pack

TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. Sold in 10 packs.

Available Options:

  • Tab, Standard, 1 1/2" Cope, Part # 2051421
  • Tab Standard, 1 3/4" Cope, Part # 2051422
  • Tab, Offset, 1 1/2" Cope, Part # 2051423
  • Tab, Offset, 1 3/4" Cope, Part # 2051424

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $21.95
Weld On Flat Tab Offset 1 1/2" Cope 10 Pack Weld On Flat Tab Offset 1 1/2" Cope 10 Pack

Weld On Flat Tab Offset 1 1/2" Cope 10 Pack

TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. Sold in 10 packs.

Available Options:

  • Tab, Standard, 1 1/2" Cope, Part # 2051421
  • Tab Standard, 1 3/4" Cope, Part # 2051422
  • Tab, Offset, 1 1/2" Cope, Part # 2051423
  • Tab, Offset, 1 3/4" Cope, Part # 2051424

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $21.95
Weld On Flat Tab Offset 1 3/4" Cope 10 Pack Weld On Flat Tab Offset 1 3/4" Cope 10 Pack

Weld On Flat Tab Offset 1 3/4" Cope 10 Pack

TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. Sold in 10 packs.

Available Options:

  • Tab, Standard, 1 1/2" Cope, Part # 2051421
  • Tab Standard, 1 3/4" Cope, Part # 2051422
  • Tab, Offset, 1 1/2" Cope, Part # 2051423
  • Tab, Offset, 1 3/4" Cope, Part # 2051424

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $21.95
Aluminized Heat Sheath - 1.25" x 3' Aluminized Heat Sheath - 1.25" x 3'

Aluminized Heat Sheath - 1.25" x 3'

This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $22.95
U.F.O. LED Safety Light U.F.O. LED Safety Light

U.F.O. LED Safety Light

The Emergency Flare, UFO (Universal Flashing Object) is the easiest and safest emergency flare to use period. Traditional incendiary flares can cause accidental fires and once ignited cannot be simply turned off. The UFO is safe and comes with a lanyard loop that can allow the UFO to be hung as an indicator while on the trail. One of the key features of this UFO is the magnetic backing which allows it to be mounted on any metal surface. Count on the UFO rain or shine with its Lithium 123A battery every time.

FEATURES: Visible up to a mile*, Compact and highly visible, Strong magnetic back, Durable construction, Standard red LED, Waterproof, Emergency flashlight mode, High-capacity Lithium battery EASY ON THE ENVIRONMENT: Replaces traditional flares that can cause accidental fires and harmful fumes. Government agencies and commercial fleets are moving away from incendiary flares because of fire, danger, pollution, and liability. POWER SOURCE: Powered by a high capacity CR123 lithium battery with a storage life of up to 1 year and a run time of up to 100 Hours. Storage temp: -400F to 2120F. Keep in your vehicle at all times.

Features:

  • Visible up to a mile
  • Compact and highly visible
  • Strong magnetic back
  • Durable construction
  • Standard red LED
  • Waterproof, Emergency flashlight mode
  • High-capacity lithium battery
  • Dimensions 1.5" inch thick by 4.5" inches

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $23.99
Evans Waterless Coolant Prep Fluid (1/2 Gallon) Evans Waterless Coolant Prep Fluid (1/2 Gallon)

Evans Waterless Coolant Prep Fluid (1/2 Gallon)

Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Please refer to installation instructions to determine the amount of prep fluid needed. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

  • Prep Fluid - Engineered specifically for use in a waterless cooling system flush. Seeks out remaining water after draining conventional anti-freeze and water from an engine.
  • Hygroscopic Engine Flush for: All Engines
  • Properties: Hygroscopically absorbs water.
  • When to use: After draining 50/50 coolant from the cooling system.
  • Benefits: Ensures all residual water is removed from the system.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!


Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $24.95
Torx Multi Tool Torx Multi Tool

Torx Multi Tool

LCE brings to you the New 9-Piece Torx - Multi Tool Kit. This all in one set offers all you would need with a tool kit. Don't be stuck again driving around with bulky tool sets. This is just the perfect size to store in the back of your Jeep for those unforeseen times. This is a perfect on-road/off-road tool kit.

Features:

  • 3/8 Ratchet
  • 9 Chrome Vanadium Bits
  • T15 - T55 and T50
  • Nylon Carrying Case

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $24.99
Tools - Tire Plug Kit Tools - Tire Plug Kit

Tire Plug Kit

Great for fixing tires quickly on the trail. Kit includes heavy duty T-handle insert tool, heavy duty rasp, 25 8" long plug strips, lubrication, 2 replacement tool ends and handy storage case. You have seen this same kit priced elsewhere for $39.00.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $26.95
Limiting Strap Clevis Kit Limiting Strap Clevis Kit

Limiting Strap Clevis Kit

Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both a single and multiple strap configurations. Our Clevis kits are made out of Super Metal Chromoly Steel which exceeds Grade 8 specifications and are zinc-plated to prevent corrosion. The clevis shank is fully threaded for easy adjustment. The Clevis is provided with zinc-plated steel spring to accommodate for change in limit strap length due to stretching. The bushings are stainless steel and are available in two different configurations. The single configuration allows for mounting one limit strap. The multiple configuration allows for mounting up to two Trail-Gear 6-ply Limit

Straps or up to three 4-ply limit straps. All mounting hardware is Grade 8 and zinc-plated.

There is no other Limiting Strap Clevis Kit on the market that compares. This is the only Grade 8 clevis on the market!!!

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $26.95
Standard Drink Holder Standard Drink Holder

Standard Drink Holder

Great for heavy equipment, tractors, or add to the back of any Console. Mounting hardware and rubber drink fingers to reduce vibration are included. Mounts to any flat surface. Holes are pre-drilled in console.

Features:

  • Oversized 3-1/2" drink holes
  • Rubber drink finger to prevent rattling
  • Mounting hardware included
  • 16 Gauge steel welded construction
  • Durable powder coat finish
  • Universal design mounts to any flat surface.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $28.95
Haynes Repair Manual-(95-04) Tacoma, 4Runner, T100 Haynes Repair Manual 1995-2004 Tacoma, 4Runner, T100

Manual - Haynes Repair Manual - Tacoma(95-04), 4Runner(96-02), T100(93-98)

This repair & service manual for Toyotas is the best available. Intended for the do-it-yourself mechanic, it features step-by-step disassembly and reassembly procedures so you can repair, service or maintain your Toyota like a pro. Where else can you find this much good information between two covers?

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $29.95
Water Ballast Fill Adapter for Tires Water Ballast Fill Adapter for Tires

Water Ballast Fill Adapter for Tires

The farming industry has been adding water and other things as ballast into their tractor's tires to help lower the center of gravity and prevent jumping out of rows for decades. Now many competitors and enthusiasts add water ballast into their tires to enjoy the same benefits, plus potential added tire life as the ballast will help prevent slipping as well. Since the water always settles evenly (as opposed to extra weights added around the wheel) it makes a crawler more stable and less likely to roll off the course. For offroad use only, driving at on-road speeds with ballast can be very dangerous. If you live in cold climates, adding anti-freeze is recommended.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $29.95
Evans Cooling Analog Refractometer Evans Cooling Analog Refractometer

Evans Cooling Analog Refractometer

Analog refractometer from Evans Cooling. A refractometer is a laboratory or field device for the measurement of an index of refraction (refractometry). Evans Cooling refractomters are used to measure the final water content of a conversion and uses a Brix scale. The refractometers are most commonly used by fleets or conversion facilities where the conversion kit might not be practical.


Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!


Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $29.95
Chromoly Interlocking Tube Clamps 1-1/4" OD .095" Wall Thickness Chromoly Interlocking Tube Clamps 1-1/4" OD .095" Wall Thickness

Chromoly Interlocking Tube Clamps 1-1/4" OD 1-1/4" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1-1/4" OD .120" Wall Thickness Chromoly Interlocking Tube Clamps 1-1/4" OD .120" Wall Thickness

Chromoly Interlocking Tube Clamps 1" OD .120" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1" OD .065" Wall Thickness Chromoly Interlocking Tube Clamps 1" OD .065" Wall Thickness

Chromoly Interlocking Tube Clamps 1" OD .065" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1" OD .120" Wall Thickness Chromoly Interlocking Tube Clamps 1" OD .120" Wall Thickness

Chromoly Interlocking Tube Clamps 1" OD .120" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1-3/4" OD .095" Wall Thickness Chromoly Interlocking Tube Clamps 1-3/4" OD .095" Wall Thickness

Chromoly Interlocking Tube Clamps 1-3/4" OD .095" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1-3/4" OD .120" Wall Thickness Chromoly Interlocking Tube Clamps 1-3/4" OD .120" Wall Thickness

Chromoly Interlocking Tube Clamps 1-3/4" OD .120" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1-1/2" OD .095" Wall Thickness Chromoly Interlocking Tube Clamps 1-1/2" OD .095" Wall Thickness

Chromoly Interlocking Tube Clamps 1-1/2" OD .095" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Chromoly Interlocking Tube Clamps 1-1/2" OD .120" Wall Thickness Chromoly Interlocking Tube Clamps 1-1/2" OD .120" Wall Thickness

Chromoly Interlocking Tube Clamps 1-1/2" OD .120" Wall Thickness

Need to place a support tube across your truggy or buggy, but need the flexibility to remove a motor, transmission, or even a seat? We have the perfect solution for you, Trail-Gear’s Interlocking Tube Clamps. They are machined from 100% 4130 Chromoly and use a counter sunk allen head screw.

Kit includes:

  • Tube clamp (1)
  • Allen head bolts (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Rock Assault 6-Ply Limit Strap Rock Assault 6-Ply Limit Strap

Rock Assault 6-Ply Limit Strap

Trail-Gear introduces the industry's first 6-layer, 1.75" nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that have been zinc-plated for corrosion-resistance and 1/2" mounting holes. These straps are made from 9,000 lb. test nylon straps and offer minimal stretch to protect against full extension and possible breakage of the shocks on even the most extreme terrain. Anti-abrasion clips have been installed in each buckle to minimize wear. Strap lengths are measured from the center of the mounting holes and are guaranteed accurate to +/- 1/4". When selecting, choose a limit strap that is 1" shorter than the shock to prevent full extension and possible breakage of shock. Sold individually.

Straps are rated at 9000 lbs.

NOTE: Strap lengths are measured from the center of the mounting holes and are guaranteed accurate to +/- 1/4".

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Evans Waterless Coolant Prep Fluid Evans Waterless Coolant Prep Fluid

Evans Waterless Coolant Prep Fluid

Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Please refer to installation instructions to determine the amount of prep fluid needed. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

  • Prep Fluid - Engineered specifically for use in a waterless cooling system flush. Seeks out remaining water after draining conventional anti-freeze and water from an engine.
  • Hygroscopic Engine Flush for: All Engines
  • Properties: Hygroscopically absorbs water.
  • When to use: After draining 50/50 coolant from the cooling system.
  • Benefits: Ensures all residual water is removed from the system.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!


Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.95
Trail Axe with Sheath Trail Axe with Sheath

Trail Axe with Sheath

This Trail Axe is made from 402 stainless and has a upswept heat treated 4" x 7.5" Axe Blade for improved chopping efficiency. The handle is made from ergonomic nylon reinforced material so you can comfortably use the axe. The axe has a built in survival kit and includes the following: Medical tape, Sewing needle, Fishing line, Matchsticks and a compass that is built into the end of the handle.

Features:

  • 402 Stainless Blade
  • Nylon Handle
  • 3 Tools In One
  • D-Ring Slot
  • 19mm Hex
  • Survival Kit
  • Built-In Compass
  • Protective Sheath

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $32.99
Coil Over Shock Spanner Wrench Coil Over Shock Spanner Wrench

Coil Over Shock Spanner Wrench

The proper tool for adjusting ride height on coil over springs.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $34.95
Weld On Flat Tab 3" Cope 10 Pack Weld On Flat Tab 3" Cope 10 Pack

Weld On Flat Tab 3" Cope 10 Pack

Our 3" coped weld on flat tab is made from 1020 hot rolled steel, is a beefy 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope, which is meant for 3" tubing.

Sold in packs of 10, shipped raw and lightly oiled. Ideal for seat tabs, seat belts tabs, and other tabs for general use.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $37.95

(1)
Weld On Flat Tab 9/16" Hole 10 Pack Weld On Flat Tab 9/16" Hole 10 Pack

Weld On Flat Tab 9/16" Hole 10 Pack

Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab.

Sold in 10 packs and shipped lightly oiled. These tabs are great for mounting almost anything. When building a buggy or a truggy these are a must have.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $37.95

(1)
Weld On Steering Wheel Disconnect Weld On Steering Wheel Disconnect

Weld On Steering Wheel Disconnect

Trail-Gear's weld on steeringwheel disconnect uses a solid billet steel hex shaft that you weld over your existing steering shaft or steering column. Then you would bolt our billet aluminum quick disconnect unit to your steering wheel. This system allows you to quickly disconnect your steering wheel by simply pushing a button on the quick disconnect.

Our weld on steering wheel disconnect is ideal for buggies and truggies on dirt, mud, or sand. Competition tested and used by some of the world’s top drivers, you cannot go wrong with this product. Available in 3/4" O.D. shaft or 7/8" O.D. shaft.

Kit Includes:

  • Weld-on steel hex shaft (1)
  • Aluminum disconnect unit (1)
  • Lock washers (3)
  • Zink plated 5/16"-18x3/4" Socket head Cap screws (3)

NOTE: Mounting circle on steering wheel is 1-3/4" Diameter.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $37.95
TG Oil Carriers TG Oil Carriers

TG Oil Carriers

Tired of having quarts of oil & fluids bouncing around in the back of your truck, buggy, and/or off-road vehicle? Our TG Oil Carriers are your solution to this problem. The TG Oil Carriers organizes and secures quarts of your automotive fluids.

Our TG Oil Carriers is CNC laser cut and formed out of 16 gauge steel. The latch is a top-quality spring draw latch with a 200lb breaking force that features a safety catch to prevent accidental openings. Predrilled mounting holes are included so you have the option of bolting it on or welding it on to your rig. Shipped raw & ready to paint.

Made in the USA.

NOTE: Holds most styles of oil quart containers.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $37.95
TG Hi-Lift Jack Mount TG Hi-Lift Jack Mount

TG Hi-Lift Jack Mounts

Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole drilled into it so that a hair-pin/cotter style pin can be inserted. This will keep the nut from rattling off and ensure that you never lose your hi-lift jack on the trail. We also added rubber pads that go between the jack and the mounts and a Velcro strap to hold the handle in place so that no vibration will be heard from any of the mounting locations. A second hole was placed on the mount so that you can put a padlock on the hi-lift to keep it totally secure from loss or theft. Product is shipped unpainted, must be welded on.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $37.95
Cam Degree Wheel - Universal 7" Diameter Cam Degree Wheel - Universal 7" Diameter

Cam Degree Wheel - Universal 7" Diameter

These degree wheels are designed to ensure maximum accuracy during camshaft installations. They're made from anodized aluminum and feature easy-to-read instructions etched into the face. They include two adapters for a universal fit on all engines.

Contact our Tech support line for further information: 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Newsletters! Or try our new web site LCEPerformance

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $39.95

(1)
Recovery Strap 3" x 20' Recovery Strap 3" x 20'

Recovery Strap 3" x 20'

We all know that recovery is just a natural part of four wheeling and rock crawling, and we also know how it feels to not have the right recovery equipment when you need it. That is why we looked long and hard to find just the right recovery straps for rock crawling and extreme four wheeling.

The Rock Recovery Straps are made from 100% high-tenacity, polyester double ply webbing that is UV and abrasion resistant. The eyelets or loops are reinforced with an abrasion resistant material for maximum strength and durability. The load or tow rating on the 3" wide straps is 35,000lbs.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $40.95
Recovery Grip Tracks Recovery Grip Tracks

Recovery Grip Tracks

Durable, molded break-resistance plastic track with multiple raised angle grips plate and hexagonal honeycomb edges for superior traction. Multiple length, triple panel design for various position and incline adjustments. Great for sand, mud and snow. Use whenever vehicle traction assistance is needed.

Features:

  • 24" x 7-1/4" opened length
  • Package includes 2 GripTracks in a nylon storage bag
  • Triple panel design for various position and incline adjustments
  • Works in sand, mud and snow

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $41.95

(1)
Axle Loop Trailer Straps Axle Loop Trailer Straps

Axle Loop Trailer Straps (Each)

Axle loop ratchet straps are a great way to attach your trail rig to the trailer. One end wraps around the axle housing, the other end clips to your trailer D-ring. Ratchet action allows for quick tightening. Strap material is 2 inches wide and 9 foot long. Working load 3,300 lbs per strap, breaking strength 10,000 lbs.

Safety notes: A minimum of four straps per rig should be used (two forward and two back). Strength reduced if load path is not in a straight line. Do not run straps over sharp edges. Replace straps if worn or damaged. Inspect each strap before use. Do not exceed working load of 3,300 lbs per strap. Check your state laws on tie down requiments.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $42.95
Smittybuilt Tire Deflators Smittybuilt Tire Deflators

Smittybuilt Tire Deflators

The Smittybuilt tire deflator system is one of the fastest and easiest systems available on the market today. Easy to set, easy to use a must have for your trail rig.

Features:

  • Fully adjustable design allow user to air down in increments of 3 PSI.
  • Tire pressure can be dropped all the way down to 8PSI.
  • One of the fastest deflators on the market today.
  • 100% quality brass.
  • No tools required.

For Comp-Air Compact Air System look P/N: 2080012

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $42.99
Aluminized Heat Shroud - 1" x 36" Aluminized Heat Shroud - 1" x 36"

Aluminized Heat Shroud - 1" x 36"

This aluminized sleeving with velcro reflects heat from wiring and hoses and is great for use on race cars, street rods, boats and trucks. Wide Velcro strips allows the use on items 3.4" to 1.25" diameter without having to remove wires and hoses for installation. Easily cut to length.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $43.95
Fuel Injector Noid Light Set (6pc) Fuel Injector Noid Light Set (6pc)

Fuel Injector Noid Light Set

This 6 piece deluxe Noid light set is the most economic way to check electronic fuel injection (EFI) signals. Simply disconnect the fuel injectors, plug the Noid Light into the injectors, plug the Noid Light into the injector wiring harness then crank the engine. Works for Toyota injectors.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $44.95
TG Single Optima Battery Box TG Single Optima Battery Box

TG Single Optima Battery Box

The TG Single Optima Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Battery Box can either be welded or bolted into place. It is made out of 1/8" thick steel and is shipped unpainted. Once the TG Battery Box has been mounted you simply remove the three bolts and the top lifts off and allows you to remove or install the battery in minutes. The TG Battery Box can either be mounted where your OEM battery was, or, due to its "flat back" design, it can be mounted behind your seat or cab. The TG Battery Box works with any optima 34/78 group battery, select Deka Intimidator 34/78 group batteries, and select Deka Rebranded 34/78 group batteries.

Now fits select Deka Intimidator batteries and Deka rebranded batteries.

TG Side-by-Side Battery Box

The TG Side-by-Side Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Side-by-Side Battery Box can either be welded or bolted into place with mounting holes located on the bottom of the battery box. Bolts on the back side allows for two battery boxes to be bolted together to form a four battery holder. The TG Side-by-Side Battery Box is CNC laser cut and formed form 12 gauge steel and is shipped unfinished. Once the TG Side-by-Side Battery Box has been mounted, you simply remove the three bolts and the top lifts off allowing you to remove or install the battery in minutes. The TG Side-by-Side Battery Box can either be mounted behind your seat or cab due to its "flat back" design. The TG Side-by-Side Battery Box works with any optima 34/78 group battery.

TG Back-to-Back Battery Box

The TG Back-to-Back Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Back-to-Back Battery Box can either be welded or bolted into place with mounting holes located on the bottom or backside of the battery box. The TG Back-to-Back Battery Box is made out of 12 gauge steel and is shipped unfinished. The modular design of the TG Back-to-Back Battery Box allows for the battery boxes to be bolted together or disassembled for a different configuration. Once the TG Back-to-Back Battery Box has been mounted, you simply remove the three bolts and the top lifts off allowing you to remove or install the battery in minutes. The TG Back-to-Back Battery Box works with any optima 34/78 group battery.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $46.95

(2)
Evans High Performance Waterless Coolant Evans High Performance Waterless Coolant

Evans High Performance Waterless Coolant

Evan high performance waterless coolant - engineered specifically for all gasoline and light duty diesel engines.Use in cars, trucks, boats, and light aircraft. Waterless Coolant for: For all gasoline engines, light duty diesels, classic to modern production cars. Before doing the conversion to Evans Waterless Coolant you will need to flush the entire cooling system and then use the Evans Prep Fluid (P/N: 1070012 or 1070013) to make sure you get all the water out of the system (Failure to do this can result in engine damage). **DO NOT ADD WATER!** Also, LCE offers a Refractometer (P/N: 1070014) that way you can be sure all the water is completely out of your cooling system before adding the Waterless Coolant. Waterless Coolant quantity required will depend on vehicle's factory specifications. Prep fluid quantity will have to be at least half of what the total coolant capacity of your vehicle is.

  • Boiling Point: Above 375°F
  • Antifreeze Properties: Protects below -40°F
  • Benefits: Reduces System Pressure, Prevents Overheating, Maximizes BHP
  • Corrosive Properties: Unbeatable protection against corrosion and electrolysis
  • Life Span: Protects for life of the engine
  • Toxicity: Low toxicity-Benefits Over Water-Based Coolants
  • Eliminates Overheating-Evans Waterless Coolants have a boiling point above 375°F and will not vaporize, thus eliminating overheating, boil-over and after-boil.
  • Reduces Pressure-Evans Waterless Coolants generate very low vapor pressures reducing stress on engine cooling system components.
  • Prevents Corrosion

Evans Waterless Coolants contain no water effectively eliminating corrosion and pump cavitation.

  • Increases BHP-Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus improving combustion efficiency and delivering more power.
  • Freeze Protection-Evans Waterless Coolants protects below -40ºF
  • Less Toxic-Evans Waterless Coolants have low toxicity.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!


Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $46.95
Recovery Strap 3" x 30' Recovery Strap 3" x 30'

Recovery Strap 3" x 20'

We all know that recovery is just a natural part of four wheeling and rock crawling, and we also know how it feels to not have the right recovery equipment when you need it. That is why we looked long and hard to find just the right recovery straps for rock crawling and extreme four wheeling.

The Rock Recovery Straps are made from 100% high-tenacity, polyester double ply webbing that is UV and abrasion resistant. The eyelets or loops are reinforced with an abrasion resistant material for maximum strength and durability. The load or tow rating on the 3" wide straps is 35,000lbs.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $48.95
Tools - Compression Tester Tools - Compression Tester

Compression Tester

Everything you need to check any engine's compression. This compression tester has an easy-to-read gauge face with a side stop release to allow repeated tests without disconnecting the hose.

Features Include:

  • Spark Plug Adapter Thread Size: 10mm, 12mm, 14mm,
  • Compression Range (psi): 0-300
  • Compression Increments (psi): 10
  • Gauge Diameter (in): 2 1/2 in.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $49.95
TG Oil Carriers TG Oil Carriers - 4 Quart Oil Carrier

TG Oil Carriers

Tired of having quarts of oil & fluids bouncing around in the back of your truck, buggy, and/or off-road vehicle? Our TG Oil Carriers are your solution to this problem. The TG Oil Carriers organizes and secures quarts of your automotive fluids.

Our TG Oil Carriers is CNC laser cut and formed out of 16 gauge steel. The latch is a top-quality spring draw latch with a 200lb breaking force that features a safety catch to prevent accidental openings. Predrilled mounting holes are included so you have the option of bolting it on or welding it on to your rig. Shipped raw & ready to paint.

Made in the USA.

NOTE: Holds most styles of oil quart containers.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $49.95
30 Foot Snatch Strap 30 Foot Snatch Strap

30 Foot Snatch Strap

The snatch strap was designed for those tough situations where a recovery strap is not strong enough. Capable of 20% stretch underload to store kenetic energy to catapult your bogged down vehicle out.

  • Snatch Strap Recovery Strap
  • 17,000 lb capacity
  • Stretched length 30 Feet, Unstretched length 17.75 Feet
  • Catapults vehicle out of bogged down situation

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $55.99
2" Hitch Receiver With 3/4" D-Ring Shackle 2" Hitch Receiver With 3/4" D-Ring Shackle

2" Hitch Receiver With 3/4" D-Ring Shackle

Designed to fit into standard 2" hitch receivers. Makes a great anchor point for winch or strap recoveries. Made from 8620 forged tool steel. Working load limit 4 3/4" tons. Includes 3/4" D-ring and receiver mount. Zinc plated finish. Does not include standard 5/8" hitch pin for receiver.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $56.95

(1)
Tools - Ring Compressor Cone (3.680" - 3.775") Tools - Ring Compressor Cone (3.680" - 3.775")

Ring Compressor Cone (3.680" - 3.775")

This adjustable ring compressor features billet aluminum construction and is hard anodized for a longer life. It has a tapered face and will adjust from 3.680" - 3.775". (93.47mm - 95.88) We use this for the .060" - .080" on the 22r.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $59.95
Tools - Ring Compressor Cone (3.580" - 3.675") Tools - Ring Compressor Cone (3.580" - 3.675")

Ring Compressor Cone (3.580" - 3.675")

This adjustable ring compressor features billet aluminum construction and is hard anodized for a longer life. It has a tapered face and will adjust from 3.580" - 3.675". (90.93mm - 93.34) We use this for STD to .040" overbore on the 22r.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $59.95
Tool Toyota Valve Adjusting Tool RZ and VZ engines Tool Toyota Valve Adjusting Tool RZ and VZ engines

Tool Toyota Valve Adjusting Tool RZ and VZ engines

SHIM STYLE VALVE ADJUSTER FOR TOYOTA

  • Unique tool permits valve adjustment on all Toyota and other OHC vehicles using spacer shims for valve adjustment
  • Wedge tool fits between the valve lifter ledge and the camshaft, maintaining gap between shim and camshaft as the pliers are removed
  • Made of quality heat-treated alloy steel

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $59.95

(2)
TG Oil Carriers TG Oil Carriers - 6 Quart Oil Carrier

TG Oil Carriers

Tired of having quarts of oil & fluids bouncing around in the back of your truck, buggy, and/or off-road vehicle? Our TG Oil Carriers are your solution to this problem. The TG Oil Carriers organizes and secures quarts of your automotive fluids.

Our TG Oil Carriers is CNC laser cut and formed out of 16 gauge steel. The latch is a top-quality spring draw latch with a 200lb breaking force that features a safety catch to prevent accidental openings. Predrilled mounting holes are included so you have the option of bolting it on or welding it on to your rig. Shipped raw & ready to paint.

Made in the USA.

NOTE: Holds most styles of oil quart containers.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $62.95
Taper Reamer Taper Reamer

Taper Reamer

This is the perfect taper reamer for reaming out Toyota and Suzuki pitman arms for the larger, more commonly used FJ80 tie rod ends, like the ones offered in our popular high steer kits. Our taper reamer is 1:10 (1" of taper for every 10" of length) and is also expressed as 1.200" TPF (1.200" of taper for every foot of length). The reamer is made from M2 high speed steel with a 1/2" shank diameter for drill press or mill and a 3/8" square end for use with a tap wrench.

Anyone can use this tool. You simply ream out the hole in the pitman arm until you can slide the shank of the TRE in, tighten the castle nut, and install the cotter pin. It takes just a few minutes and can be done with hand tools.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $67.95

(1)
22" Slide-n-Lock Tie Down System 22" Slide-n-Lock Tie Down System

22" Slide-n-Lock Tie Down System

The Slide-N-Lock Tie Down System is the ultimate way to secure any type of payload! With self-locating holes placed every 5 inches, you can position the spring-loaded locking pins where you need them in seconds, making this versatile system incredibly simple and effective. Includes two Anodized Aluminum Rails, Stainless Steel Locking Pins, Predrilled Mounting Holes, and Mounting Hardware.

Features:

  • Self-locating holes placed every 5"
  • Silver
  • Two anodized aluminum rails
  • Stainless steel locking pins
  • Pre-drilled mounting holes
  • Mounting hardware included

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $72.95
Trail Gas Can Storage Box Trail Gas Can Storage Box

Trail Gas Can Storage Box

Features:

  • All metal 14-gauge steel construction
  • Red powder coat finish
  • Locking lid to secure contents
  • This is open to store large items
  • Fits 5 gallon Gerry can mount bracket
  • Dimensions 18" x 13" x 6"

This cool new Lockable Tool Storage Box looks just like the original Jerry® gas can, but instead of carrying fuel you will be able to store large items. It is constructed of heavy duty 14 gauge steel with a red powder coat finish for durability. Will fit the five gallon Jerry® can mount brackets.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $79.95
Removable Secure Lock Box Removable Secure Lock Box

Removable Secure Lock Box

Protect your valuables while traveling with a Smittybilt Secure Lock Box. Constructed from 14 gauge heavy-duty steel with a universal mounting sleeve that can be placed anywhere within the cab of your Toyota. Dual-Lock System allows the box to be removed from the sleeve while locked.

Features:

  • Universal
  • Black
  • Constructed of 14-gauge heavy-duty steel
  • Dual lock system
  • Locks into mounting sleeve in vehicle
  • Removes from sleeve while box is still locked
  • Dimensions: 8.25in. x 9.25in. x 3.in.
  • Egg shell lined glued on the top and bottom of inside of box

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $84.99
Roll Bar Mount For Compact Air System Roll Bar Mount For Compact Air System

Roll Bar Mount For Compact Air System

Keep your Smittybilt Comp-Air Compact Air System out of the way and easily accessible with this convenient roll bar mount.

Features:

  • Attaches to roll bar
  • Fits Smittybilt Comp-Air Compact Air System
  • Keep your tank safe and out of the way

For Comp-Air Compact Air System look P/N: 2080012

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $89.99
Trail Gas Can Utility Tool Box Trail Gas Can Utility Tool Box

Trail Gas Can Utility Tool Box

Features:

  • All metal 14-gauge steel construction
  • Red powder coat finish
  • Locking lid to secure contents
  • Lift out tool tote tray
  • Two removable drawers
  • Screw driver storage slots
  • Non-slip soft liners included
  • Fits 5 gallon Gerry can mount bracket
  • Dimensions 18" x 13" x 6"

This cool new Lockable Tool Storage Box looks just like the original Jerry® gas can, but instead of carrying fuel you will be able to store your tools. They are constructed of heavy duty 14 gauge steel with a red powder coat finish for durability.

With a lift out tote tray and two slide out drawers that have non-slip liners in them. Also comes with four screw driver storage slots. Will fit the five gallon Jerry® can mount brackets

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $99.95
Wheel Spacers(Pair) - 6 Lug x 1" Wide (6 on 5.5") Wheel Spacers(Pair) - 6 Lug x 1" Wide (6 on 5.5")

Wheel Spacers(Pair) - 6 Lug x 1" Wide (6 on 5.5")

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on (86+) Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Uses Grade 8 Studs and Grade 10.9 nuts. Five sizes available.

Shipped as a set of 2 spacers with nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pick-Ups, 4Runners, FJ-40, FJ-60 and FJ80's. Manufacturer recommends cutting wheel studs for proper fitment.

These will not work on a Chevy.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $101.95

(1)
Wheel Spacers(Pair) - 6 Lug x 1.25"Wide(6 on 5.5") Wheel Spacers(Pair) - 6 Lug x 1.25"Wide(6 on 5.5")

Wheel Spacers(Pair) - 6 Lug x 1.25" Wide (6 on 5.5")

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on (86+) Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Uses Grade 8 Studs and Grade 10.9 nuts. Five sizes available.

Shipped as a set of 2 spacers with nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pick-Ups, 4Runners, FJ-40, FJ-60 and FJ80's.

These will not work on a Chevy.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $101.95
Wheel Spacers(Pair) - 6 Lug x 1.5"Wide (6 on 5.5") Wheel Spacers(Pair) - 6 Lug x 1.5"Wide (6 on 5.5")

Wheel Spacers(Pair) - 6 Lug x 1.5" Wide (6 on 5.5")

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on (86+) Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Uses Grade 8 Studs and Grade 10.9 nuts.

Five sizes available. Shipped as a set of 2 spacers with nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pick-Ups, 4Runners, FJ-40, FJ-60 and FJ80's.

These will not work on a Chevy.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $101.95

(1)
Aluminized Heat Screen (36" x 40") Aluminized Heat Screen (36" x 40")

Aluminized Heat Screen (36" x 40")

This aluminized radiant matting has a multitude of uses around race cars, boats and trucks. Can be used on turbos and to ward off heat while working in a hot space. Keeps heat away from painted surfaces that can blister and Heat Screen's aluminized surface reflects 2,000 degrees F. Used in aviation and aerospace industry.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $103.95
TG Dual Optima Side By Side Battery Box TG Dual Optima Side By Side Battery Box

TG Side-by-Side Battery Box

The TG Side-by-Side Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Side-by-Side Battery Box can either be welded or bolted into place with mounting holes located on the bottom of the battery box. Bolts on the back side allows for two battery boxes to be bolted together to form a four battery holder.

The TG Side-by-Side Battery Box is CNC laser cut and formed form 12 gauge steel and is shipped unfinished. Once the TG Side-by-Side Battery Box has been mounted, you simply remove the three bolts and the top lifts off allowing you to remove or install the battery in minutes. The TG Side-by-Side Battery Box can either be mounted behind your seat or cab due to its "flat back" design. The TG Side-by-Side Battery Box works with any optima 34/78 group battery.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $113.95
TG Dual Optima Back To Back Battery Box TG Dual Optima Back To Back Battery Box

TG Back-to-Back Battery Box

The TG Back-to-Back Battery Box will keep your battery where you want it, even on the toughest rocks and trails. We have all seen the results of batteries not held in place securely, or held in place by bungie cords: fire and sparks. The TG Back-to-Back Battery Box can either be welded or bolted into place with mounting holes located on the bottom or backside of the battery box. The TG Back-to-Back Battery Box is made out of 12 gauge steel and is shipped unfinished.

The modular design of the TG Back-to-Back Battery Box allows for the battery boxes to be bolted together or disassembled for a different configuration. Once the TG Back-to-Back Battery Box has been mounted, you simply remove the three bolts and the top lifts off allowing you to remove or install the battery in minutes. The TG Back-to-Back Battery Box works with any optima 34/78 group battery.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $113.95
Spidertrax 1.5" Lug Centric Wheel Spacer Set Spidertrax 1.5" Lug Centric Wheel Spacer Set

Spidertrax 1.5" Lug Centric Wheel Spacer Set

Spidertrax has been providing the off-road market with quality wheel spacers since 1999. With their vehicle specific designs, aluminum anodizing for critical corrosion resistance, and their unmatched competition tested no risk money back guarantee, it's easy to see why Spidertrax Wheel Spacers are the #1 choice among four-wheelers. All Spidertrax Wheel Spacer Kits come complete with (2) 6061 T6 anodized aluminum wheel spacers, pre-installed wheel studs, lug nuts, and Loctite. Proudly manufactured in the United States of America.

1.5" Wheel Spacers Fit:

  • 95.5-00 Tacoma 4x4 and PreRunner
  • 93-99 T100
  • 84-95 4Runner
  • 76-95 Pickup 4x4
  • 60-84 FJ40
  • 80 series Landcruiser
  • Sold in sets of (2)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $118.95
Wheel Spacers(Pair) - 6 Lug x 2"Wide (6 on 5.5") Wheel Spacers(Pair) - 6 Lug x 2"Wide (6 on 5.5")

Wheel Spacers(Pair) - 6 Lug x 2" Wide (6 on 5.5")

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on (86+) Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Uses Grade 8 Studs and Grade 10.9 nuts. Five sizes available.

Shipped as a set of 2 spacers with nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pick-Ups, 4Runners, FJ-40, FJ-60 and FJ80's.

These will not work on a Chevy.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $118.95
Vehicle Recovery & Winch Accessory Kit Vehicle Recovery & Winch Accessory Kit

Vehicle Recovery & Winch Accessory

Kit Contains all the fundamental winch rigging tools needed for recovering you or your buddy's rig and performing other winching operations

  • Recovery chain
  • Tow strap
  • Snatch block
  • D-Ring Shackle
  • All items in this Smittybilt Recovery Kit store away neatly in the included Smittybilt Logo Carrying Case

Off road recovery kits are a must for any 4WD Toyota or off-road vehicle owner, and this is the perfect solution for you if you are purchasing a winch. You never know when you're going to need these tools to help someone out of a tough spot, or to recover your vehicle. Kit includes: heavy-duty gloves, a recovery chain, tow straps, D-ring and a snatch block.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $119.95
Tools - Cylinder Leak Down Tester Cylinder Leak Down Tester

Cylinder Leak Down Tester

This tester is the superior dual guage design, it has an adjustable left-hand gauge, with a precision regulator, and a large easy to read right hand guage. This precision tool allows you to check engine condition. Comes with a 14MM hose. With adapter it can be used to set injection barrel valves.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $140.95
Rock Recovery Suspension Winch 3000 Rock Recovery Suspension Winch 3000

Rock Recovery Suspension Winch 3000

Trail-Gear understands when you have a link or even leaf sprung suspension, that during a vertical climb or decent, your suspension will unload making your truck less stable as the center of gravity becomes higher. Our answer to this problem is a small, easy to mount suspension winch that will allow you to stabilize your suspension and effectively control how much suspension droop you have during times when having that control makes all the difference.

Most competition buggies and hard core trail rigs have been using these suspension winches for years to get the job done, so Trail-Gear has decided to offer the Rock Recovery Suspension Winch 3000. It is compact, reliable, and easy to install. Everything about the Rock Recovery Suspension Winch 3000 is tailored so that installation is a snap.

The power cord is 57" long, so you can install this winch on the front or rear of your truck and have plenty of wire to reach the battery, the control is engineered so that it can be installed by attaching it to a piece of tubing, a shifter, or by using the bracket to fasten it to a switch panel.

The Rock Recovery Suspension Winch 3000 is shipped without winch line and can either be used with cable or synthetic winch line. We recommend 25' to 40' of 5/16" winch line for best performance.

Specifications:

  • Input: 12V DC 3.9hp/2.9kW
  • Output: 1.34hp/1kW
  • Line Pull Rating: 3,000 lbs
  • Line Capacity: 25'-40' of 5/16" synthetic winch line
  • Gear Train: 1 Stage planetary
  • Gear Ratio: 153:1
  • Clutch: Sliding gear
  • Braking action: Automatic in the gear
  • Dimensions: 12.6" x 4.45" x 4.13"
  • Drum size: 1.24" x 2.88"
  • Bolt pattern: 3.13"
  • Net weight: 20 lbs

This product is considered an electronic product and we don't accept any returns on this merchandise. All warranties on this product will be handled directly by Trail-Gear.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $150.95
Wheel Spacers(Pair) - 6 Lug x 3"Wide (6 on 5.5") Wheel Spacers(Pair) - 6 Lug x 3"Wide (6 on 5.5")

Wheel Spacers(Pair) - 6 Lug x 3" Wide (6 on 5.5")

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on (86+) Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Uses Grade 8 Studs and Grade 10.9 nuts. Five sizes available.

Shipped as a set of 2 spacers with nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pick-Ups, 4Runners, FJ-40, FJ-60 and FJ80's.

These will not work on a Chevy.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $154.95
ARB Compact Compressor Kit ARB Compact Compressor Kit

ARB Compact Compressor Kit

The ARB CKSA12 compact air compressor kit is designed specifically as an economical, quick installing, super compact and lightweight air source to suit the ARB Air Locker.

  • Fully sealed components for moisture and dust resistance.
  • Ultra compact design will fit into tight areas where most other compressors will not.
  • Pressure switch controlled air manifold system specially designed to suit all ARB Air Locker equipped vehicles.
  • Hard anodized cylinder bore and PTFE impregnated carbon fiber piston rings for reduced friction and maximum trouble free life.
  • New anodized mounting bracket dissipates heat and allows compressor to be repositioned 180*.
  • Re-locatable air filter assembly for cleaner, cooler air supply and versatile waterproof air intake positioning.
  • Full wiring loom included for simplified installation and plug-in connectivity to Air Locker control solenoids.
  • All rotating components 100% ball bearing equipped for extra long life, low heat and quiet operation.
  • Low current draw means it will run on the 12V accessory supply of most 12V and 24V vehicles.
  • Weighs 2.5 lbs - less than half what the larger RDCKA pump weighs!

This compact compressor is only intended for engaging ARB lockers and is not intended for tire inflation or other high volume applications.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $168.95
ARB Awning 1250mm (4 ft.) ARB Awning 1250mm (4 ft.)

List Price: $187.68
Our Price: $174.95
You save $12.73!
Recovery Bundle Traction Aid Ramps + Strap Recovery Bundle Traction Aid Ramps + Snatch Strap

Recovery Bundle Traction Aid Ramps + Strap

The new AER (all element ramps) are the perfect traction aid for inclement weather conditions or any type of loose terrain. They feature heavy-duty nylon reinforced plastic construction and high traction surfaces to get you out of the mud, snow or sand with ease. Each ramp can support up to 7,700 lbs. Ramps are sold in pairs and come with a durable nylon storage bag.

The snatch strap was designed for those tough situations where a recovery strap is not strong enough. Capable of 20% stretch underload to store kenetic energy to catapult your bogged down vehicle out.

  • Snatch Strap Recovery Strap
  • 17,000 lb capacity
  • Stretched length 30 Feet, Unstretched length 17.75 Feet
  • Catapults vehicle out of bogged down situation

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $215.95
Bed Mounted Spare Tire Rack Universal Bed Mounted Spare Tire Rack Universal

Bed Mounted Spare Tire Rack Universal

Designed to secure the tire to the rack. Fits from 33" to 40" tire. Includes Red Strap.


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $242.95
Bushranger Sand Tracks Bushranger Sand Tracks

Bushranger Sand Tracks

Bushranger sand tracks have been designed to be easily deployed under the vehicle to deliver traction in marginal conditions. Sold as a pair.

The 1500mm long and 300mm wide Sand Tracks are easily rolled up for compact storage in a specially designed canvas and Velcro wrap bag.

"These Sand Tracks are an innovative, easy to stow and easy to use solution for low traction conditions, such as loose sand, mud and even snow."


Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $242.95
Compact Air System Compact Air System

Compact Air System

The all new Compact Air System is the latest addition to Smittybilt’s extensive range of quality accessories. After traversing some tough rock trails or cruising through sandy dunes, the last thing you want to do is waste time re-filling tires to continue on with the journey. The Smittybilt Compact Air System comes equipped with an adjustable integrated regulator with 250 PSI, capable of pumping a massive 32 Cubic Feet / Minute.

Not only will this compact air system inflate tires quickly and easily, it can also act as an off-road life saver as it has enough power to run small air tools. The compact air system is completely portable, so you have the flexibility to take it wherever you need to. In addition, it comes standard with a heavy duty carry bag to protect it, as well as making it much easier to transport.

Features:

  • Adjustable integrated regulator with a max 250 PSI
  • Maximum of 32 Cubic Feet Per Minute (900 Liters Per Minute)
  • Inflates tires quick and easy
  • Enough power to run small air tools
  • Completely portable - can be used for off road, RV or the everyday user
  • Carrying bag included
  • Ergonomic handle
  • Inguide glycerin filled gauge with polycarbonate window
  • Air chuck included
  • 25ft hose

For Roll Bar Mount look P/N: 2080013

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $345.99
Boost Controller Boost Controller

Our Price: $349.95
TG 10,000 Winch TG 10,000 Winch

TG10000 Winch

The TG10000 Winch has an IP68 rating (Ingress Protection Rating) on the solenoid and IP67 rating on the drum. The TG10000 Winch meets all SAE-J706 standards for winches. With 17 internal seals, it is completely protected from the elements and is 100% waterproof and dust/sand proof.

What is an IP68 rating?

  • IP = Ingress Protection Rating
  • The first digit represents the level of protection against the ingress of solid objects. The highest rating is "6" - Completely dust tight.
  • The second digit represents the level of protection against total immersion. The highest rating is "8" − Continuous immersion in over one meter of water.

The TG10000 Winch is far ahead of its competitors. With a 6.5 HP series wound motor, three stage planetary gear system, 265:1 gear ratio, and automatic load holding brake, you can count on this winch in any situation. Included with your TG10000 Winch is a very smart, ergonomically designed remote control with a 10' cord and very functional sealed switch. Also included is a roller fairlead, a hook, and all the necessary mounting hardware.

Maximum winchline capacity: 3/8" x 75' Duraline Exoshield winchline or 3/8" x 100' Duraline winchline

Kit Includes:

  • TG10000 Winch
  • Sealed Remote Switch with 10' Cord
  • Roller Fairlead
  • Hook
  • Mounting Hardware

This product is considered an electronic product and we don't accept any returns on this merchandise. All warranties on this product will be handled directly by Trail-Gear.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $480.95
ARB Twin Air Compressor Kit ARB Twin Air Compressor Kit

ARB Twin Air Compressor Kit

This compact vehicle mounted compressor has been designed to do everything! Activate your ARB Air Locking Differentials, air up a 35" tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs. Includes a full wiring harness, air locker solenoid terminals, OE-grade compressor isolating switch, mounting hardware and instructions.

Features:

  • 100% duty cycle
  • 6.16 CFM
  • Air up 35" tires in less than a minute
  • 2-year warranty

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $517.49