You are here: Home > Celica > Second generation (1977 - 1981) > Pulleys
Sort By:
Page of 1
Pulley - 20R/22R/RE Front Balancer Bolt OEM Toyota P/N: 90105-14004 Pulley - 20R/22R/RE Front Balancer Bolt

Pulley - 20R/22R/RE Front Balancer Bolt
OEM Toyota P/N: 90105-14004

We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with the large flange. Bolt size is m14 x 1.50. It is ecommend to use Anti-seize when installing

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

List Price: $13.96
Our Price: $12.08
You save $1.88!

(11)
Water Pump Pulley(Billet)(6") - 20R/22R/RE/RET Water Pump Pulley Billet 6" 20R/22R/RE/RET

Water Pump Pulley Billet 6" 20R/22R/RE/RET

The 6" polished Underdrive Pulleys can reduce water pump RPM and dress up the front of your engine. These pulleys are CNC machined from billet 6061 T-6 aluminum bar stock and cut with performance lightening holes to reduce weight. The 6" Underdrive Pulley fits any 20R/22R/22RE/RET engine and is polished to a high luster finish.

Application Notes:

Can be used with the stock harmonic balancer or our 4" power pulley.

Not recommended for low RPM applications such as rock crawling.

See Part# 1016120 for the street underdrive kit.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $68.95

(2)
Water Pump Pulley Billet Stock  4 3/4" 20R/22R/RE/RET Water Pump Pulley Billet Stock Size 4 3/4" 20R/22R/RE/RET

Water Pump Pulley Billet Stock Size 4 3/4" 20R/22R/RE/RET

This polished water pump pulley is the same size as a stock pulley (4 3/4"). This pulley is perfect for a low RPM application like rock crawling since it does not slow the water pump down like our underdrive pullies do. These pulleys are CNC machined from billet 6061 T-6 aluminum bar stock and cut with performance lightening holes to reduce weight. The stock pulley comes in just under a pound at 15.6 oz the billet weighs in at 9.4 oz that's over 6 oz less. Less weight for your engine to rotate. This fits any 20R/22R/22RE/RET engine and is polished to a high luster finish.

Application Notes:

  • Can be used with the stock harmonic balancer or our 4" power pulley.
  • Perfect for engine dress up, stock and low RPM applications. This will use a stock size belt. If need be you may reference Carquest part number 7340.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $68.95

(7)
Water Pump Pulley(Billet)(7") - 20R/22R/RE/RET Water Pump Pulley(Billet)(7") - 20R/22R/RE/RET

Water Pump Pulley(Billet)(7") - 20R/22R/RE/RET,

The 7" black anodized Underdrive Pulleys is designed to reduce water pump RPM in high RPM race applications. These pulleys are CNC machined from billet 6061 T-6 aluminum bar stock and cut with performance lightening holes to reduce weight.

Application Notes:

  • 7" underdrive pulley is designed for high RPM (constant 5,000rpm and up) applications
  • -7" Underdrive Pulley will not work with power steering.
  • -Can not be used with the stock harmonic balancer our 4" power pulley will be required.

See Part# 1016123 or Part# 1016124 for complete race underdrive pulley kits.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $89.95

(1)
20R/22R/RE/RTE OEM Crankshaft Outer Pulley OEM Crankshaft Outer Pulley Toyota OEM P/N: 13477-38010 20R/22R/RE/RTE OEM Crankshaft Outer Pulley

20R/22R/RE OEM Crankshaft Outer Pulley
Toyota OEM P/N: 13477-38010

This Pulley is for vehicles equipped with power steering. If you are thinking about replacing your Harmonic Balancer, you will need this pulley too. Over the course of your engine's life, the elastomer in the factory balancer can deteriorate, causing a decrease in performance and possible engine vibration. Replace the old worn out one with a new OEM quality balancer from us. This is meant to use with a double V Belt style Pulley.

Contact our Tech Support Line for further information at 928-855-6341.

Check outwww.LCEngineering.comfor New Products, Tech Articles,Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $89.95

(2)
Underdrive Pulley 20R/22R/RE/RET 4" Double Groove Underdrive Pulley 20R/22R/RE/RET 4" Double Groove

Underdrive Pulley 20R/22R/RE/RET 4" Double Groove

Underdrive pulleys are a great addition for just about any high RPM performance application. The light weight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design will allow your engine to turn your front belt accessories with less effort. All this means you gain performance and a cleaner looking engine compartment. Another added benefit is the built in degree wheel on the front of the pulley that will allow you dial in your top dead center point much more accurately. The stock harmonic damper is steel, weighs in at 5 pounds and over 6" in diameter we shave off a full 2" in diameter and cut the weight down to 1 pound by using American T-6 6061 billet aluminum.

High RPM race engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss. Each 4" diameter Crankshaft Power Pulley is made from 6061 T-6 aluminum and is then hard anodized for extra strength with laser etched markings for long life.

There are three pulleys to choose from:

Single groove would be a race application only running a alternator. With no power steering or other belt driven accessory.

Double groovewould be used with alternator and A/C or custom belt accessory and no power steering.

Triple groovepulley would be used for running alternator A/C and power steering.

Application Notes:

Not recommended for low RPM applications such as rock crawling.

The Underdrive Pulley Should be used with our Adjustable Timing Tag! part #1016117

For Crankshaft Oil Seal see part #1015042

For Single groove applications see part #1016102

For triple groove applications see part #1016105

For Complete Underdrive Kits See part #'s 1016120, 1016123 and 1016124.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $119.95

(1)
20R/22R/22RE/22RTE Factory Replacement Harmonic Balancer 20R/22R/22RE/22RTE Factory Replacement Harmonic Balancer

20R/22R/22RE/22RTE Factory Replacement Harmonic Balancer

Factory replacement harmonic balancer for 20R, 22R, 22RE and 22RTE engines. Over the course of your engine's life, the elastomer in the factory balancer can deteriorate, causing a decrease in performance and possible engine vibration. Replace the old worn out one with a new OEM quality balancer from us. This is a double V Belt style.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $124.95

(4)
Underdrive Pulley 20R/22R/RE/RET 4" Triple Groove Underdrive Pulley 20R/22R/RE/RET 4" Triple Groove

Underdrive Pulley 20R/22R/RE/RET 4" Triple Groove

Underdrive pulleys are a great addition for just about any high RPM performance application. The light weight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design will allow your engine to turn your front belt accessories with less effort. All this means you gain performance and a cleaner looking engine compartment. Another added benefit is the built in degree wheel on the front of the pulley that will allow you dial in your top dead center point much more accurately.

The stock harmonic damper is steel, weighs in at 5 pounds and over 6" in diameter we shave off a full 2" in diameter and cut the weight down to 1.5 pounds by using American T-6 6061 billet aluminum.

High RPM race engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss. Each 4" diameter Crankshaft Power Pulley is made from 6061 T-6 aluminum and is then hard anodized for extra strength with laser etched markings for long life.

There are three pulleys to choose from:

Single groovewould be a race application only running a alternator. With no power steering or other belt driven accessory.

Double groovewould be used with alternator and A/C or custom belt accessory and no power steering.

Triple groovepulley would be used for running alternator A/C and power steering.

Application Notes:

Not recommended for low RPM applications such as rock crawling.

Single groove pulley will run the water pump and alternator only.

The Triple Groove Power Pulley Should be used with our Adjustable Timing Tag! part #1016117

For Crankshaft Oil Seal see part #1015042

For single groove applications see part #1016102

For double groove applications see part #1016104


For Complete Underdrive Kits See part #'s 1016120, 1016123 and 1016124 .

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $132.95

(5)
Pro Underdrive Kit Race Only 7" 20R/22R/RE/RET Use Without Alternator Pro Underdrive Kit Race Only 7" 20R/22R/RE/RET Use Without Alternator

Pro Underdrive Kit Race Only 7" 20R/22R/RE/RET Use Without Alternator
FOR HIGH RPM APPLICATIONS ONLY

High RPM race engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss.

The light weight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design will allow your engine to turn your front belt accessories with less effort. All this means you gain performance and a cleaner looking engine compartment. Another added benefit is the built in degree wheel on the front of the pulley that will allow you dial in your top dead center point much more accurately.

This Underdrive Kit for race applications includes a 7" billet water pump pulley,single groove 4" crank underdrive pulley, adjustable timing tag, front balancer bolt and belt.

The single groove 4" diameter Crankshaft Power Pulley that comes in this kit is made from 6061 T-6 aluminum and is then hard anodized for extra strength.

Application Notes:

-The 7" kits will not work with the stock power steering pump.

-This kit is designed for high RPM applications only.

-This kit is designed to be used without an alternator.

-For high RPM race applications with alternator and pulley choice see part #1016124.

-For street applications and pulley choice see part #1016120.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $184.95

(1)
Pro Underdrive Kit 7" 20R/22R/RE/RET Use With Alternator Pro Underdrive Kit 7" 20R/22R/RE/RET Use With Alternator

Pro Underdrive Kit 7" 20R/22R/RE/RET For Use With Alternator

High RPM race engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss.

The light weight of these billet aluminum pulleys will also reduce the rotational drag on your engine.

Another added benefit is the built in degree wheel on the front of the pulley that will allow you dial in your top dead center point much more accurately.

The Underdrive Kit for race applications includes a 7" billet water pump pulley, 4" crank underdrive pulley (your choice of single, dual, or triple, depending on your needs, see below), adjustable timing tag, front balancer bolt and belt.

Each 4" diameter Crankshaft Power Pulley is made from 6061 T-6 aluminum and is then hard anodized for extra wear resistance.

There are three pulleys to choose from.
YOU MUST CHOOSE ONE TOP RIGHT OF THE SCREEN.

(This will default to the triple groove. If you need to exchange YOU will be responsible for all shipping charges.)

Single groovewould be a race application only running a alternator. With no power steering or other belt driven accessory.

Double groovewould be used with alternator and A/C or custom belt accessory and no power steering.

Triple groovepulley would be used for running alternator A/C and power steering.

The stock belt line up is inner belt is water pump and alternator middle pulley is A/C and outer most pulley is power steering.

Application Notes:

-The 7" kits will not work with the stock power steering pump.

-This kit is designed for high RPM applications only.

-This kit is designed to be used with an alternator.

-For high RPM race applications with out alternator see part #1016123.

-For street applications see part #1016120.

FOR HIGH RPM APPLICATIONS ONLY

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $196.95

(1)
Street Underdrive Kit(6") - 20R/22R/RE/RET Street Underdrive Kit With 6" Water Pump Pulley 20R/22R/RE/RET

Street Underdrive Kit With 6" Water Pump Pulley 20R/22R/RE/RET

Street vehicles running high RPM engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss.

The light weight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design will allow your engine to turn your front belt accessories with less effort. All this means you gain performance and a cleaner looking engine compartment.

Each 4" diameter Crankshaft Power Pulley is made from 6061 T-6 aluminum and is then hard anodized for extra wear resistance.

Another added benefit is the built in degree wheel on the front of the pulley that will allow you dial in your top dead center point much more accurately. Our Underdrive Kit for street applications includes a 6" polished billet water pump pulley, 4" crank underdrive pulley (your choice of single, dual, or triple, depending on your needs see below), adjustable timing tag, front balancer bolt and belt. For street applications running an alternator.

There are three pulleys to choose from.

Single groovewould be a race application only running a alternator. With no power steering or other belt driven accessory.

Double groove would be used with alternator and A/C or custom belt accessory and no power steering.

Triple groovepulley would be used for running alternator A/C and power steering.

The stock belt line up is inner belt is water pump and alternator middle pulley is A/C and outer most pulley is power steering.

Application Notes:

-Not recommended for low RPM applications such as rock crawling.

-For high RPM race applications see part #1016123 and #1016124.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

Our Price: $199.95

(5)