Evans High Performance Waterless Coolant

Evan high performance waterless coolant - engineered specifically for all gasoline and light duty diesel engines.Use in cars, trucks, boats, and light aircraft. Waterless Coolant for: For all gasoline engines, light duty diesels, classic to modern production cars. Before doing the conversion to Evans Waterless Coolant you will need to flush the entire cooling system and then use the Evans Prep Fluid, see Part #: 1070012 or 1070013 to make sure you get all the water out of the system (Failure to do this can result in engine damage). **DO NOT ADD WATER!** Also, LC Engineering offers a Refractometer, see Part #: 1070014 that way you can be sure all the water is completely out of your cooling system before adding the Waterless Coolant. Waterless Coolant quantity required will depend on vehicle's factory specifications. Prep fluid quantity will have to be at least half of what the total coolant capacity of your vehicle is. Evans Waterless Coolants contain no water effectively eliminating corrosion and pump cavitation.

Specifications:

• Boiling Point: Above 375°F
• Antifreeze Properties: Protects below -40°F
• Benefits: Reduces System Pressure, Prevents Overheating, Maximizes BHP
• Corrosive Properties: Unbeatable protection against corrosion and electrolysis
• Life Span: Protects for life of the engine
• Toxicity: Low toxicity-Benefits Over Water-Based Coolants
• Eliminates Overheating-Evans Waterless Coolants have a boiling point above 375°F and will not vaporize, thus eliminating overheating, boil-over and after-boil.
• Reduces Pressure-Evans Waterless Coolants generate very low vapor pressures reducing stress on engine cooling system components.
• Prevents Corrosion
• Increases BHP-Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus improving combustion efficiency and delivering more power.
• Freeze Protection-Evans Waterless Coolants protects below -40ºF
• Less Toxic-Evans Waterless Coolants have low toxicity.

This product should not be used in a manner that violates Federal EPA Laws.

Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!