K&N Breather-20R/22R/RE/RET/2RZ/3RZ-Eliminates PCV
K&N Breather-20R/22R/RE/RET/2RZ/3RZ-Eliminates PCV
 
Our Price: $29.99

Part Number: 3035043
Qty:

Details Fitment
 

K&N PCV Breather

(62-1015)
Not Recommended For Any Street Vehicle

K&N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1015 crankcase vent filter has a K&N embossed chrome-plated steel top with a chrome-plated steel base. The 1/2 inch diameter zinc tube is designed to push in and clamp directly onto metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Filters can be pressed into rubber grommets in valve covers for direct mounting. When using dual carburetors or performance type single carburetors, this Crankcase Breather should be installed in place of the PCV valve located at the back of the valve cover. Designed for race or boosted applications only.

Features:

  • 1/2 inch zinc tube
  • Chrome-plated steel top and rubber base
  • Mounts directly into rubber grommets in valve covers
  • Washable and reusable filter media

Specifications:

  • Vent Outside Diameter: 0.5 in (13 mm)
  • Outside Diameter: 2 in (51 mm)
  • Height: 1.5 in (38 mm)
  • Top Style: Metal
  • Filter Material: Non-woven Synthetic
  • Top Material: Chrome
  • Product Style: Steel Base Crankcase Vent Filters
  • Flange Length: 0.875 in (22 mm)
  • Flange Type: Centered
  • Flanges: 1
  • Weight: 0.2 lb (0.1 kg)
  • Product Box Height: 6.1 in (155 mm)
  • Product Box Length: 4.1 in (104 mm)
  • Product Box Width: 2.13 in (54 mm)
  • Inner Wire: No

NOTE: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle. The New K&N Filters will not come with oil like the good old days.

This removes the PCV valve which is used to remove carbon from the crankcase, which keeps your oil cleaner. If running this filter, you will need to change your oil every 300-500 miles. If your vehicle is STREET DRIVEN at all, we recommend retaining the PCV Valve System.


This product should not be used in a manner that violates Federal EPA Laws.


Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 41 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Not installedbyet April 8, 2021
Reviewer: Maurice Benas from Allen, TX United States  
.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 breather February 17, 2021
Reviewer: Coden Skahan from Yakima, WA United States  
.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Haven't installed but very pleased October 22, 2020
Reviewer: Buddy Hardy from Mountain City, TN United States  
Very pleased quality of product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 K&n Breather September 2, 2020
Reviewer: Todd from Richmond, VA United States  
Breather fit perfectly

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 the bees knees July 30, 2020
Reviewer: Will Lee from Garden City, GA United States  
great filter for the pcv delete, get a valve cover grommet as well. chances are the stock one is crusty and brittle

Was this review helpful to you?

View All Customer Reviews