Home > BOOST > TURBOCHARGERS > Turbos & Kits >

Pro Turbo Kit (High Boost) 22RET Turbo Block Only
Pro Turbo Kit High Boost 22RET For Stock Turbo Block

Racer Net: $2,499.95

Part Number: 1071006

Optional Upgrades

Ball Bearing Upgrade*:

LCE Turbo Kit
Pro Turbo Kit High Boost 22RET For Stock Turbo Block

LCE's Turbo Kits are designed for use on the Toyota 22RE-powered trucks, 4Runners and Celicas. Whether it's for street use or competitive drag racing this is the kit to maximize the horsepower of the Toyota 22 engine. The LCE High Boost Turbo Kit is designed for use with a stand alone engine management system such as the Pro Fuel Injection System or any tunable stand-alone engine management. The Pro Fuel Injection system can be programmed to provide the correct fuel and ignition curve for a performance turbo engine. For this high-boost setup, we highly recommend your engine is set up to handle boost before adding a turbocharger kit. Lower compression (9:1 or less) is the biggest factor.

The base kit features a Garrett T3/T4 Hybrid Turbo, high temperature Ceramic coated CNC Turbo manifold, custom-fit T304 stainless steel downpipe, Turbosmart adjustable waste gate, blow-down tube to dump wastegate gasses into downpipe for quiet operation, stainless steel charge pipe to go from turbocharger to throttle body, Turbosmart adjustable boost controller for in-cab adjustments and all the necessary silicone couplers, gaskets, fittings, lines and hardware for installation. All pipes are ceramic coated for great looks and lower underhood temperatures.

Turbo Kit Specs:
  • TO4E 50-Trim Turbo
  • .63 AR Turbine housing with .60 AR on the Compressor side
  • CNC Turbo manifold Turbo Header
  • Ceramic Coated Stainless Steel Downpipe (2-1/2")
  • 40mm Turbosmart V-Band Wastegate (14psi)
  • Coated Charge Pipe (2")
  • Silicone Couplers
  • Hose Clamps
  • Oil Feed Line
  • Oil Drain Hose
  • Oil Feed And Drain Fittings
  • Gaskets

  • Application Notes:
    This kit is designed to work with the stock Toyota turbo block. Oil feed and drain lines will hook to the factory locations. See part number 1071007 for the kit that is designed for NON Turbo Blocks.

    Recommended Parts:
    Low Compression Engine
    Stand Alone Engine Management System That Is Tunable
    Larger injectors
    Blow Off Valve
    High Flow Air Filter System

    Contact our Tech Support Line for further information at 928-855-6341.

    Check out www.LCEngineering.com for New Products, Tech Articles,
    Specials & Monthly Newsletters!
    Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.

    Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

      0 of 0 people found the following review helpful:
    Product Turbo Kit February 18, 2015
    Reviewer: Hal Shafer from Van Wert, Ohio United States  
    We were treated very well and will return to LCE to do business in the future.  Wes was our sales representative that help us with the purchase.  He went above and beyond.  Thanks for the great Service,  Hal Shafer

    Was this review helpful to you?

    Browse for more products in the same category as this item:

    BOOST > TURBOCHARGERS > Turbos & Kits