22RE Pro Turbo Kit High Boost NON Turbo Block Only with Ball Bearing Upgrade
22RE Pro Turbo Kit High Boost  NON Turbo Block Only with Ball Bearing Upgrade
 
Our Price: $3,499.95
Shipping Delay: Usually Ships in 5 to 6 Weeks

Part Number: 1071008
Qty:

Details
 

Pro Turbo Kit

(High Boost)

LC Engineering's Turbo Kits are designed for use on the Toyota 22RE-powered trucks, 4Runners and Celicas. Whether it's for street use or competitive drag racing this is the kit to maximize the horsepower of the Toyota 22 engine. The LC Engineering's High Boost Turbo Kit is designed for use with a stand alone engine management system, or any tunable stand-alone engine management. The Haltech ECU can be programmed to provide the correct fuel and ignition curve for a performance turbo engine. For this high-boost setup, we highly recommend your engine is set up to handle boost before adding a turbocharger kit. Lower compression (9:1 or less) is the biggest factor.

The base kit features a Garrett T3/T4 Hybrid Turbo, high temperature Ceramic coated CNC Turbo manifold, custom-fit T304 stainless steel downpipe, Turbosmart adjustable wastegate, blow-down tube to dump wastegate gasses into downpipe for quiet operation, stainless steel charge pipe to go from turbocharger to throttle body, Turbosmart adjustable boost controller for in-cab adjustments and all the necessary silicone couplers, gaskets, fittings, lines and hardware for installation. All pipes are ceramic coated for great looks and lower underhood temperatures.

This turbo has the upgraded ball bearing ceramic journal for a stronger unit with less friction. These turbos will inherently spool quicker than the standard journal Garrett turbos.

Specifications:

  • TO4E 50-Trim Turbo
  • .63 AR Turbine housing with .60 AR on the Compressor side
  • CNC Turbo manifold Turbo Header
  • Ceramic Coated Stainless Steel Downpipe (2-1/2")
  • 40mm Turbosmart V-Band Wastegate (14psi)
  • Coated Charge Pipe (2")
  • Silicone Couplers
  • Hose Clamps
  • Oil Feed Line
  • Oil Drain Hose
  • Oil Feed And Drain Fittings
  • Gaskets

NOTE: This kit is designed to work with all stock Toyota non turbo blocks. Comes with fittings to add to Oil feed and drain lines, see Part # 1071006 for the kit that is designed for Factory Turbo Blocks.The 22re factory computer will not support a turbo.

Recommended Parts:

  • Low Compression Engine
  • Stand Alone Engine Management System That Is Tunable
  • Larger injectors
  • Blow Off Valve
  • High Flow Air Filter System
  • Intercooler

This product should not be used in a manner that violates Federal EPA Laws.


Contact our Tech Support Line for further information at 928-855-6341.

Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.


Suggested with your install...
LCE Connecting Rod Chromoly H-Beam Toyota Journal 20R/22R/RE/RET Haltech Elite 750 22RE Fuel Management System w/ Complete Harness Kit Pro Piston Set(8.0:1) - 22R/RE/RET 1985-1995 (+.040")(93mm) Pro Head Stud Set - 20R/22R/RE/RET
Our Price: $299.95

Add
Our Price: $2,699.00

Add
Our Price: $849.95

Add
Our Price: $179.95

Add
LCE Connecting Rod Chrome-moly H-Beam  20R/22R/RE/RET Haltech Elite 750 22RE Fuel Management System w/ Complete Harness Kit Pro Piston Set(8.0:1) - 22R/RE/RET 1985-1995 (+.040")(93mm) Pro Head Stud Set - 20R/22R/RE/RET

Share your knowledge of this product with other customers... Be the first to write a review