Underdrive Pulley (4" Double Groove)

Underdrive pulleys are an excellent addition for just about any high RPM performance application. The lightweight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design will allow your engine to turn your front belt accessories with less effort. All this means you gain performance and a cleaner looking engine compartment. Another added benefit is the built-in degree wheel on the front of the pulley that will allow you to dial in your top dead center point much more accurately. The stock harmonic damper is steel, weighs in at 5 pounds and over 6" in diameter we shave off a full 2" in diameter and cut the weight down to 1 pound by using American T-6 6061 billet aluminum.

High RPM race engines often overdrive the water pump making the engine's cooling system inefficient. These Crankshaft Power Pulleys reduce water pump and alternator RPM providing better cooling and less power loss. Each 4" diameter Crankshaft Power Pulley is made from 6061 T-6 aluminum and is then hard anodized for extra strength with laser etched markings for long life.

There are three pulleys to choose from:

• Single groove: would be a race application only running an alternator. With no power steering or other belt driven accessory.
• Double groove would be used with an alternator and A/C or custom belt accessory and no power steering.
• Triple-groove pulley would be used for running alternator A/C and power steering.

Application Notes:

• Not recommended for low RPM applications such as rock crawling.
• Single groove pulley will run the water pump and alternator only.
• The Single Groove Power Pulley Should be used with our Adjustable Timing Tag Part #: 1016117.
• For Crankshaft Oil Seal see Part #:1015042.
• For single groove applications see Part #1016102.
• For triple groove applications see Part #: 1016105.
• For Complete Underdrive Kits See Part #:'s 1016120, 1016123 and 1016124.

Contact our Tech Support Line for further information at 928-855-6341.