Tools - Plastigage Clearance Indicator(.001" to .003")

Made from a special extruded plastic thread with accurately controlled crush properties, Plastigage provides a fast and accurate way to check bearing clearances. Plastigage is packaged in a calibrated envelope that not only protects the plastic threads, but also serves as a scale to measure the bearing clearance. One package contains enough Plastigage to check both main and connecting rod clearance for one engine.

NOTE: This part number will measure clearance from .001" to .003" or .025mm to .076mm.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Tool - 3mm Allen Wrench(Ball Head)

This 3mm allen wrench is used mainly for our TPS screw upgrade kit. The ball end of the wrench allows off angle access to the TPS screws. This makes adjusting the TPS a lot easier if you are doing it in the vehicle.

Also check out our complete TPS screw upgrade kit (part #1093082).

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Silicone - Ultra Grey Silicone Sealant

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers' performance requirements. Noncorrosive and low-odor. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids.

Guaranteed not to leak. Temperature range -65ºF to 500ºF (-54ºC to 260ºC) intermittent. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Socket - Recessed 10mm Allen Socket w/ 3/8" Drive

This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs (Part# 2053160 & Part# 2053162).

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Tool - Allen Bolt Upgrade Kit For TPS

One challenge to adjusting the TPS is that the screws are nearly impossible to access when the unit is in the vehicle. To make the adjustment easier LC Engineering offers a TPS bolt upgrade kit to replace the stock TPS Phillips head screws with allen head bolts and then uses a ball-end allen wrench to loosen and tighten them. The ball headed allen wrench allows you to access the bolts at an angle instead of having to get to them straight on like the stock screws.

This kit will also help if you have damaged the stock screw heads trying to loosen them up. This kit contains two M4-0.7 x 16mm socket head bolts, four M4 flat washers and one 3mm ball head allen wrench. The screw length changed around on the stock applications so we supply you with screws to match the longest stock application and then you can use the supplied washers to shim them as needed for proper length.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(15)

Piston Ring Installing Pliers

This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

TOYOTA Seal Packing 103 (Formed-In-Place-Gasket)

OEM Toyota P/N: 00295-00103

TOYOTA OEM specified for oil pan and camshaft housing. Guaranteed not to leak. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(3)

Hi-Lift Jack Rubber Isolator

The Trail-Gear hi-lift jack rubber isolator is is the perfect fix for that hi-lift or hi-lift style jack you have rattling around in the back or your truck. The isolator slides onto both the jack and the jack handle keeping them from vibrating together and holding both components firmly in place.

Our Isolator is 100% rubber, black, and very durable. It not only keeps your jack from rattling, but it also keeps your jack handle from bouncing around and doing damage to you or your rig.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Tool - Adjustable Piston Stop

These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work in all vehicles that have a 14mm spark plug thread diameter.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Aluminized Heat Sheath - .75" x 3'

This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Flip Socket (1/2" Drive) - 19mm & 21mm

For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard sockets. Especially handy for custom wheels with tight lugnut openings. This socket is rated for use with an impact gun. 1/2" drive. (Extension NOT Included)

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Aluminized Heat Sheath - 1.25" x 3'

This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Evans Waterless Coolant Prep Fluid (1/2 Gallon)

Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Please refer to installation instructions to determine the amount of prep fluid needed. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

• Prep Fluid - Engineered specifically for use in a waterless cooling system flush. Seeks out remaining water after draining conventional anti-freeze and water from an engine.
• Hygroscopic Engine Flush for: All Engines
• Properties: Hygroscopically absorbs water.
• When to use: After draining 50/50 coolant from the cooling system.
• Benefits: Ensures all residual water is removed from the system.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Tire Plug Kit

Great for fixing tires quickly on the trail. Kit includes heavy duty T-handle insert tool, heavy duty rasp, 25 8" long plug strips, lubrication, 2 replacement tool ends and handy storage case. You have seen this same kit priced elsewhere for $39.00.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Water Ballast Fill Adapter for Tires

The farming industry has been adding water and other things as ballast into their tractor's tires to help lower the center of gravity and prevent jumping out of rows for decades. Now many competitors and enthusiasts add water ballast into their tires to enjoy the same benefits, plus potential added tire life as the ballast will help prevent slipping as well. Since the water always settles evenly (as opposed to extra weights added around the wheel) it makes a crawler more stable and less likely to roll off the course. For offroad use only, driving at on-road speeds with ballast can be very dangerous. If you live in cold climates, adding anti-freeze is recommended.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Evans Cooling Analog Refractometer

Analog refractometer from Evans Cooling. A refractometer is a laboratory or field device for the measurement of an index of refraction (refractometry). Evans Cooling refractomters are used to measure the final water content of a conversion and uses a Brix scale. The refractometers are most commonly used by fleets or conversion facilities where the conversion kit might not be practical.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Evans Waterless Coolant Prep Fluid

Evans Prep Fluid is a waterless cooling system flush designed to remove water-based antifreeze after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Please refer to installation instructions to determine the amount of prep fluid needed. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

• Prep Fluid - Engineered specifically for use in a waterless cooling system flush. Seeks out remaining water after draining conventional anti-freeze and water from an engine.
• Hygroscopic Engine Flush for: All Engines
• Properties: Hygroscopically absorbs water.
• When to use: After draining 50/50 coolant from the cooling system.
• Benefits: Ensures all residual water is removed from the system.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Coil Over Shock Spanner Wrench

The proper tool for adjusting ride height on coil over springs.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

TG Hi-Lift Jack Mounts

Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole drilled into it so that a hair-pin/cotter style pin can be inserted. This will keep the nut from rattling off and ensure that you never lose your hi-lift jack on the trail. We also added rubber pads that go between the jack and the mounts and a Velcro strap to hold the handle in place so that no vibration will be heard from any of the mounting locations. A second hole was placed on the mount so that you can put a padlock on the hi-lift to keep it totally secure from loss or theft. Product is shipped unpainted, must be welded on.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Cam Degree Wheel - Universal 7" Diameter

These degree wheels are designed to ensure maximum accuracy during camshaft installations. They're made from anodized aluminum and feature easy-to-read instructions etched into the face. They include two adapters for a universal fit on all engines.

Contact our Tech support line for further information: 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles,
Specials & Monthly Newsletters!

Newsletters! Or try our new web site LCEPerformance

(1)

Axle Loop Trailer Straps (Each)

Axle loop ratchet straps are a great way to attach your trail rig to the trailer. One end wraps around the axle housing, the other end clips to your trailer D-ring. Ratchet action allows for quick tightening. Strap material is 2 inches wide and 9 foot long. Working load 3,300 lbs per strap, breaking strength 10,000 lbs.

Safety notes: A minimum of four straps per rig should be used (two forward and two back). Strength reduced if load path is not in a straight line. Do not run straps over sharp edges. Replace straps if worn or damaged. Inspect each strap before use. Do not exceed working load of 3,300 lbs per strap. Check your state laws on tie down requiments.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Aluminized Heat Shroud - 1" x 36"

This aluminized sleeving with velcro reflects heat from wiring and hoses and is great for use on race cars, street rods, boats and trucks. Wide Velcro strips allows the use on items 3.4" to 1.25" diameter without having to remove wires and hoses for installation. Easily cut to length.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Fuel Injector Noid Light Set

This 6 piece deluxe Noid light set is the most economic way to check electronic fuel injection (EFI) signals. Simply disconnect the fuel injectors, plug the Noid Light into the injectors, plug the Noid Light into the injector wiring harness then crank the engine. Works for Toyota injectors.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Evans High Performance Waterless Coolant

Evan high performance waterless coolant - engineered specifically for all gasoline and light duty diesel engines.Use in cars, trucks, boats, and light aircraft. Waterless Coolant for: For all gasoline engines, light duty diesels, classic to modern production cars. Before doing the conversion to Evans Waterless Coolant you will need to flush the entire cooling system and then use the Evans Prep Fluid (P/N: 1070012 or 1070013) to make sure you get all the water out of the system (Failure to do this can result in engine damage). **DO NOT ADD WATER!** Also, LCE offers a Refractometer (P/N: 1070014) that way you can be sure all the water is completely out of your cooling system before adding the Waterless Coolant. Waterless Coolant quantity required will depend on vehicle's factory specifications. Prep fluid quantity will have to be at least half of what the total coolant capacity of your vehicle is.

• Boiling Point: Above 375°F
• Antifreeze Properties: Protects below -40°F
• Benefits: Reduces System Pressure, Prevents Overheating, Maximizes BHP
• Corrosive Properties: Unbeatable protection against corrosion and electrolysis
• Life Span: Protects for life of the engine
• Toxicity: Low toxicity-Benefits Over Water-Based Coolants
• Eliminates Overheating-Evans Waterless Coolants have a boiling point above 375°F and will not vaporize, thus eliminating overheating, boil-over and after-boil.
• Reduces Pressure-Evans Waterless Coolants generate very low vapor pressures reducing stress on engine cooling system components.
• Prevents Corrosion

Evans Waterless Coolants contain no water effectively eliminating corrosion and pump cavitation.

• Increases BHP-Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus improving combustion efficiency and delivering more power.
• Freeze Protection-Evans Waterless Coolants protects below -40ºF
• Less Toxic-Evans Waterless Coolants have low toxicity.

Contact our Tech Support Line for further information at 928-855-6341. Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Compression Tester

Everything you need to check any engine's compression. This compression tester has an easy-to-read gauge face with a side stop release to allow repeated tests without disconnecting the hose.

Features Include:

• Spark Plug Adapter Thread Size: 10mm, 12mm, 14mm,
• Compression Range (psi): 0-300
• Compression Increments (psi): 10
• Gauge Diameter (in): 2 1/2 in.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Ring Compressor Cone (3.680" - 3.775")

This adjustable ring compressor features billet aluminum construction and is hard anodized for a longer life. It has a tapered face and will adjust from 3.680" - 3.775". (93.47mm - 95.88) We use this for the .060" - .080" on the 22r.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Ring Compressor Cone (3.580" - 3.675")

This adjustable ring compressor features billet aluminum construction and is hard anodized for a longer life. It has a tapered face and will adjust from 3.580" - 3.675". (90.93mm - 93.34) We use this for STD to .040" overbore on the 22r.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Taper Reamer

This is the perfect taper reamer for reaming out Toyota and Suzuki pitman arms for the larger, more commonly used FJ80 tie rod ends, like the ones offered in our popular high steer kits. Our taper reamer is 1:10 (1" of taper for every 10" of length) and is also expressed as 1.200" TPF (1.200" of taper for every foot of length). The reamer is made from M2 high speed steel with a 1/2" shank diameter for drill press or mill and a 3/8" square end for use with a tap wrench.

Anyone can use this tool. You simply ream out the hole in the pitman arm until you can slide the shank of the TRE in, tighten the castle nut, and install the cotter pin. It takes just a few minutes and can be done with hand tools.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

(1)

Trail Gas Can Storage Box

Features:

• All metal 14-gauge steel construction
• Red powder coat finish
• Locking lid to secure contents
• This is open to store large items
• Fits 5 gallon Gerry can mount bracket
• Dimensions 18" x 13" x 6"

This cool new Lockable Tool Storage Box looks just like the original Jerry® gas can, but instead of carrying fuel you will be able to store large items. It is constructed of heavy duty 14 gauge steel with a red powder coat finish for durability. Will fit the five gallon Jerry® can mount brackets.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Trail Gas Can Utility Tool Box

Features:

• All metal 14-gauge steel construction
• Red powder coat finish
• Locking lid to secure contents
• Lift out tool tote tray
• Two removable drawers
• Screw driver storage slots
• Non-slip soft liners included
• Fits 5 gallon Gerry can mount bracket
• Dimensions 18" x 13" x 6"

This cool new Lockable Tool Storage Box looks just like the original Jerry® gas can, but instead of carrying fuel you will be able to store your tools. They are constructed of heavy duty 14 gauge steel with a red powder coat finish for durability.

With a lift out tote tray and two slide out drawers that have non-slip liners in them. Also comes with four screw driver storage slots. Will fit the five gallon Jerry® can mount brackets

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Aluminized Heat Screen (36" x 40")

This aluminized radiant matting has a multitude of uses around race cars, boats and trucks. Can be used on turbos and to ward off heat while working in a hot space. Keeps heat away from painted surfaces that can blister and Heat Screen's aluminized surface reflects 2,000 degrees F. Used in aviation and aerospace industry.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

Cylinder Leak Down Tester

This tester is the superior dual guage design, it has an adjustable left-hand gauge, with a precision regulator, and a large easy to read right hand guage. This precision tool allows you to check engine condition. Comes with a 14MM hose. With adapter it can be used to set injection barrel valves.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

ARB Compact Compressor Kit

The ARB CKSA12 compact air compressor kit is designed specifically as an economical, quick installing, super compact and lightweight air source to suit the ARB Air Locker.

• Fully sealed components for moisture and dust resistance.
• Ultra compact design will fit into tight areas where most other compressors will not.
• Pressure switch controlled air manifold system specially designed to suit all ARB Air Locker equipped vehicles.
• Hard anodized cylinder bore and PTFE impregnated carbon fiber piston rings for reduced friction and maximum trouble free life.
• New anodized mounting bracket dissipates heat and allows compressor to be repositioned 180*.
• Re-locatable air filter assembly for cleaner, cooler air supply and versatile waterproof air intake positioning.
• Full wiring loom included for simplified installation and plug-in connectivity to Air Locker control solenoids.
• All rotating components 100% ball bearing equipped for extra long life, low heat and quiet operation.
• Low current draw means it will run on the 12V accessory supply of most 12V and 24V vehicles.
• Weighs 2.5 lbs - less than half what the larger RDCKA pump weighs!

This compact compressor is only intended for engaging ARB lockers and is not intended for tire inflation or other high volume applications.

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!

ARB Twin Air Compressor Kit

This compact vehicle mounted compressor has been designed to do everything! Activate your ARB Air Locking Differentials, air up a 35" tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs. Includes a full wiring harness, air locker solenoid terminals, OE-grade compressor isolating switch, mounting hardware and instructions.

Features:

• 100% duty cycle
• 6.16 CFM
• Air up 35" tires in less than a minute
• 2-year warranty

Contact our Tech Support Line for further information at 928-855-6341.

Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!